This product is no longer in stock
3M complete TR-600-ECK Versaflo kit for respiratory protection by powered air purifying respirator (PAPR). This piece of equipment gets its NIOSH homologation when assembled with the other components recognized by the manufacturer as part of a complete system. It is recommended for workers in need of respiratory protection in health, food and pharmaceutical sectors. Compatible with 3M series TR-600 filters and cartridges. One kit per case. Please allow 2 to 3 weeks for delivery.
3M TR-600 Versaflo is a new generation powered air purifying respirator which offers a perfect balance between protection and comfort. It combines components which protect not only one’s respiratory tract but also one’s eyes and face. The kit includes among others, a standard nominal capacity battery which provides 4 to 12 hours of run time and many accessories.
Included in the kit:
- 1 Powered air purifying respirator unit (RVTR602N)
- 1 Filter cover (RVTR6700FC)
- 1 Airflow indicator (RVTR971)
- 1 Easy clean polyurethane, EVA and neoprene belt (RVTR627)
- 1 Standard capacity lithium ion battery; Run time of 4 to 12 hours (RVTR630)
- 1 Single station battery charger kit (RVTR641N)
- 1 High efficiency (HE) particulate filter (RVTR6710N)
- 1 Respiratory hood (RBS/433L)
- 2 Prefilters (RVTR6600)
- 1 Heavy duty polyurethane breathing tube; Length: 525 to 850 mm (RBT30)
- 1 Disposable breathing tube cover (RBT922)
3M manufacturer’s code: TR-600-ECK
3M RVTR602N Versaflo powered air purifying respirator unit features:
PAPRs, powered air purifying respirator are systems made to blow filtered air into the respiratory equipment, which provides air automatically rather than mechanically such as regular respirators. 3M RVTR602N motor/blower paired with 3M RBS/433L facepiece differs from other PAPRs by its lightness, its ergonomic and its versatility which allows everyone, even bearded men to be protected when well installed. This type of equipment offers a protection up to 1000 times the permissible exposure limit set by the CNESST or any other government regulation applicable. PAPRs minimize the effort put into breathing and can reduce build up heat inside the facepiece. It features a smart engine which adapts accordingly to the filters in use. It is also equipped with an alarm system - one audible and one LED – which alert the user to either a low battery or low airflow. The powered unit has three airflow settings: standard, medium and high flow. The engine starts automatically at the standard flow and the user can change the settings afterwards accordingly to his needs. This powered unit allows one to use combined filter/cartridges, which means it’s more powerful than previous equipment. Please note that this equipment is not intrinsically safe. This PAPR contains no natural rubber latex.
RBS/433L facepiece features:
This hood is disposable and is equipped with a preassembled and integrated head harness for a ready-to-use product. The textile part is made of laminated polypropylene, that is, a light and abrasion resistant material. Moreover, the S-series lens low curvature offers an excellent field of vision and reduces annoying reflections and glare. Finally, this hood allows an optimal air distribution which minimizes whistling noises for a greater comfort and noise reduction.
This type of respiratory protection system is recommended for work that will loosen solid particles, vapors and gases in the air such as work in health facilities, food factories and pharmaceutical laboratories. The facepiece is disposable which is safer for users being exposed to substances that may stay on the textile surface, thus contaminating users if they had to wash the facepiece.
Do not use for:
It can neither ensure the user intrinsic safety in an environment representing an explosion risk. It is strongly discouraged to wear any kind of respirator for application with sandblasting. It is also highly advised to stay away from environment that exceed 1000 times the permissible exposure limit set by the CNESST or any other government regulation applicable. One should never use a respirator in an oxygen deprived environment (an atmosphere with less than 19,5 % oxygen).
Maintenance and service life:
For a safer performance, manufacturer’s recommendation must be followed. 3M recommends an inspection of the respiratory equipment before each use; to wash the respirator after each use; and to store the respirator back to its packaging.
One should never wash its respirator with any type of solvents since they can weaken some components which can affect the efficiency of the equipment. Filtering elements must never be immersed in water. The motor/blower and the battery can now be immersed if equipped with the RVTR653 cleaning and storage kit.
|Type of product||Safety equipment|
|Main category||Personal protection|
|Sub category||Respiratory protection|
|Sub sub category||TR-600 Versaflo head-mounted powered air purifying respirator|
|Name of the product||Complete Versaflo (Tm) kit|
|Series of products||Versaflo (Tm) TR-600|
|Country of origin||United State of America|
|Reusable||Reusable with prior hygienic measurement|
|Battery type||Lithium-ion battery with rechargeable base capacity|
|Battery life||4 to 12 hours|
|Inherently safe||Not inherently safe|
|Protection factor||Protection factor of 1000|
|Protection against gases and vapors||Oily and not oily particles|
|Faceseal membrane||With faceseal|
|Cartridge or Filter Included||HEPA filter include|
|Respirator Style||Powered air purifying respirator|
|Facepiece type||Hood with integrated facial membrane seal|
|Mounting type||Waistband installation|
|Type of hose||Corrugated flexible and lightweight material for greater comfort ans less fatigue|
|Hose length||20 5/8 in / 52.5 cm when compressed, 33 3/8 in /85 cm when stretched|
|Type of connection||Back installation|
|Facial part||S-series hood RBS/433L|
|Material||See items separately|
|Washable||Wipe with a damp cloth, do not immerse motor and battery in water unless using the RVTR653 Cleaning Protection Kit|
|Height (in/cm)||10.59 in / 26.9 cm|
|Length (in/cm)||16.73 in / 42.5 cm|
|Width (in/cm)||12.36 in / 31.4 cm|
|Weight (lb/kg)||8.81 lb / 4 Kg|
|Another packaging available||36 units per pallet|
|Return conditions||No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page|
No customer reviews for the moment.