- New
This item is not kept in stock. Please allow 15 days for delivery.
Ergodyne GloWear 8008 high visibility gaiters, model 29083, lime, one size, sold by the pair. Waterproof polyurethane-coated polyester shell, 3M Scotchlite tape and top and bottom drawstrings. ANSI/ISEA 107 Class E, not flame resistant, worn over boots.
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
Manufacturer code Ergodyne: 29083, model 29083
This item is not kept in stock. Please allow 15 days for delivery.
Ergodyne GloWear 8008 gaiters add a high visibility element around the lower legs and are worn over boots. Their lime polyurethane-coated polyester shell is waterproof and features 2 in 3M Scotchlite reflective tape. Drawstrings at the top and bottom allow their fit to be adjusted. This one-size model is rated ANSI/ISEA 107 Class E and is not flame resistant. Sold by the pair under number 29083, it is selected according to workplace requirements.
For movement near service vehicles, loading area maintenance and work around manholes on a roadwork site where the task assessment calls for high visibility gaiters. Select other required garments separately according to task requirements. The gaiters' Class E rating does not establish a complete garment ensemble class.
Machine wash cold without bleach and tumble dry on low heat. Do not dry clean or iron. Care instructions allow up to 25 washes. Inspect the shell, drawstrings and tape after use and replace damaged gaiters even before reaching that wash limit.
Yes. They go over boots and are adjusted with the drawstrings at the top and bottom.
The lime model is one size and the sales unit is one pair.
No. The offered GloWear 8008 gaiters are not flame resistant, also designated non-FR.
They are rated ANSI/ISEA 107 Class E. This designation applies to the gaiters and does not by itself give the worn ensemble a complete class.
Machine wash cold without bleach and tumble dry low, up to 25 washes. Do not iron or dry clean.
For a road maintenance worker wearing these gaiters during an inspection around a manhole, plan for smoke-lens Privo glasses (YA12262) under suitable light conditions and ultra-thin high visibility TenActiv gloves (GS21TXUGFN) with a nitrile foam coating. An MSA V-Gard helmet (TA80) with ratchet suspension, uncorded Laser Lite earplugs (OA1101) and a yellow manhole collar (EPTBBT) with an inflatable seal complete preparations according to noise and site layout.
To select clothing worn above the gaiters, compare the yellow detachable Pioneer 6931 vest (V6931) and the orange (V6930) Pioneer 6930 model. The Pioneer 6936 with a mesh (V6936) back and the orange 6935 (V6935) version offer other constructions to examine. The twelve-pocket 6672 (V6672) surveyor vest addresses another storage need. Assess each garment separately without inferring an ensemble class from these combinations.
Data sheet
You might also like