- New
Kleton adjustable filler panel for wire mesh partition, blue
IGKD119
Made in Canada
$80.30
This item is not kept in stock. Please allow 15 days for delivery.
Kleton adjustable filler panel, blue, for wire mesh partitions. It slides over the end of an existing section and fills a 6 to 10 in gap thanks to bolt holes spaced every 1 in. Offered in 1 x 4 ft or 1 x 8 ft sizes.
Return conditions:
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
Kleton adjustable filler panel for wire mesh partition, blue
Manufacturer code Kleton: KD119, model KD119
This item is not kept in stock. Please allow 15 days for delivery.
Available in 2 sizes. Select the variant you need from the drop-down menu.
| Sylprotec code | Manufacturer code | Size |
| IGKD119 | KD119 | 1 ft W X 4 ft H |
| IGKD118 | KD118 | 1 ft W X 8 ft H |
The Kleton adjustable filler panel fills empty spaces at the end of a Kleton wire mesh partition. It slides over the end of an existing section; its bolt holes, spaced every 1 in, let it fill a 6 to 10 in gap. Its holes are lined up with those of the existing panel, then it is fastened at the top and bottom. It is therefore not installed on its own: it extends a section already in place. In blue, it is offered in 1 x 4 ft or 1 x 8 ft sizes. Made in Canada, it is covered by a 1-year limited warranty.
Features of the Kleton filler panel
- Fills a 6 to 10 in gap at the end of the partition
- Slides over the end of an existing section
- Bolt holes every 1 in, lined up with those of the existing panel
- Fastened at the top and bottom
- 1 x 4 ft or 1 x 8 ft, blue, 1-year limited warranty
Applications of the Kleton filler panel
The Kleton adjustable filler panel closes the 6 to 10 in gap left at the end of a wire mesh partition, so that the enclosure for tools, valuable stock or hazardous materials stays closed along its full length.
Care of the Kleton filler panel
Periodically check that the top and bottom bolts are tight. Replace the panel if it is bent after an impact.
FAQ: the Kleton filler panel
What gap can this panel fill?
A 6 to 10 in gap at the end of the partition. Its bolt holes, spaced every 1 in, let you adjust the width.
How is it installed?
It slides over the end of an existing section. Its holes are lined up with those of the existing panel, then it is fastened at the top and bottom.
Can it be installed on its own?
No. It extends a partition section already in place, sliding over its end and fastening to it.
How much does the panel weigh?
The 1 x 4 ft size weighs 10 lb and the 1 x 8 ft size weighs 16 lb.
Where is the panel made and what is the warranty?
It is made in Canada and covered by a 1-year limited warranty.
Suggestions for this Kleton filler panel
For the maintenance worker fitting this Kleton panel at the end of a wire mesh partition, plan for an economical one-size fluorescent yellow safety sash (VV20), a women's yellow high-visibility long-sleeve shirt (V6969F), touchscreen-compatible Dyneema SureKnit gloves (GS13GDSTL), Virtua Max bifocal safety glasses (YA11514) to check the hole alignment up close and 3M disposable earplugs (O1100).
This panel extends the blue Kleton partition panels (IGKD121) and completes an enclosure closed by a Kleton heavy-duty swing door (IGKD111). Where the partition meets a wall, add the blue wall bracket (IGKD115), and to carry the panels, the Kleton universal posts (EDKD129), offered in yellow. During assembly, set out an 18 in orange cone (EPTCONE) in the aisle.
IGKD119
Data sheet
- Product group
- Safety equipment
- Main category
- Industrial accessories
- Sub category
- Warehouse products
- Name of the product
- Adjustable filler panel
- Product code
- IGKD11XR
- Sort by keywords
- Filler panels
- Product use
- Fills 6 to 10 in gaps at the end of wire mesh partitions
- Manufacturer
- KLETON
- Country of origin
- Canada
- Features
- Bolt holes every 1 in
- Mounting type
- Slides over the end of an existing section, fastened at top and bottom
- Length (in/cm)
- Not published by the manufacturer
- Width (in/cm)
- 48 to 96 in / 121.92 to 243.84 cm
- Height (in/cm)
- 12 in / 30.4 cm
- Weight (lb/kg)
- 10 to 16 lb / 4.54 to 7.26 kg
- Sold by
- Unit
- Color
- Kleton blue
- Return conditions
- No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
- Warranty
- 1-year limited warranty
- Caution
- Not installed on its own: attaches to an existing section
Specific References
- mpn
- KD119
You might also like
Comments (0)
No customer reviews for the moment.
8 other products in the same category:
This item is not kept in stock. Please allow 15 days for delivery.
Kleton adjustable filler panel, blue, for wire mesh partitions. It slides over the end of an existing section and fills a 6 to 10 in gap thanks to bolt holes spaced every 1 in. Offered in 1 x 4 ft or 1 x 8 ft sizes.