- New
This item is not kept in stock. Please allow 15 days for delivery.
Justrite (Accuform line) 8 ft galvanized steel U-channel sign post, with 3/8 in holes on 1 in centers along the length. Sets in ground, in concrete or on a portable base and withstands nearly all weather conditions.
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
Manufacturer code Justrite: HSP109, model HSP109
This item is not kept in stock. Please allow 15 days for delivery.
The Justrite HSP109 U-channel post, from the Accuform line, supports traffic and safety signs. Made of galvanized steel, it withstands nearly all weather conditions. It is 8 ft (96 in) long, with 3/8 in holes on 1 in centers along its entire length, so the sign height can be chosen. It sets directly in ground, in concrete or on a portable base. It is made in the United States.
In parking lots, plant yards and traffic lanes, the Justrite post carries stop, speed or safety instruction signs. Drive it into the ground, set it in concrete for a lasting installation, or mount it on a portable base for temporary use.
Periodically check that the post stays straight and firmly anchored, and that the sign fastening is tight.
In ground, in concrete or on a portable base.
8 ft (96 in).
The 3/8 in holes are on 1 in centers along the entire length of the post.
Yes. It is galvanized and withstands nearly all weather conditions.
Justrite, in its Accuform line (no. HSP109). It is made in the United States.
For the grounds worker setting this Justrite post for a parking sign, plan for a Pioneer 6676 orange surveyor vest (V6676) in 1200 denier polyurethane coated polyester with 13 pockets, ParaActiv Pro cut-resistant yarn and side-split leather gloves (G132) to handle the post, Jackson Safety Nemesis safety glasses (YA3302) with a copper lens for outdoor work, a 3M 8210 disposable particulate mask (R8210) while mixing concrete and a 3M H10B behind-the-head earmuff (OPH10B) while driving the post.
In a parking lot, complete the sign with the 6 ft Zenith speed bump (EPHF709) to slow vehicles down. During installation, mark off the area with a 28 in orange cone (EPTCONE28B) with 2 reflective collars or another 18 in cone (EPTCONE), and close access with a yellow “Danger” barricade tape (ECT3YE7) or a red “Danger” 3 in X 1000 ft tape (ECT3RE9).
Data sheet
You might also like