

No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
Safety harness by Peakworks. CSA class A, with one back D-ring. The chest straps and leg straps close with mating buckles. Universal size. Ideal for small-scale maintenance works, construction works, etc.
Peakworks product code: V8002000 or model FBH-10000A
Complies with ANSI Z359.1 and CSA Z259.10-12.
This harness can support a maximum weight of 400 lb (180 kg), including clothing, tools, etc.
This lightweight safety harness is equipped with one back D-ring made of steel. This Peakworks safety harness is made of woven non-stretch polyester. Polyester offers a superior resistance to acids. The chest straps and leg straps close with mating buckles. The harness certification tags are sewn on the front straps.
Inspection:
The worker is responsible for visually inspecting the harness before each use. During this routine inspection, the worker must note any signs of degradation, malfunction, or breakage. The harness will have to be replaced if any such signs are detected.
On top of this routine inspection, the harness must be inspected by a qualified person different than the worker that wears the harness. The frequency of these inspections varies according to the manufacturer. Some manufacturers require an inspection every 90 days, others every 180 days, or even yearly. These inspections should be performed more often if the harness is worn in extreme environmental working conditions.
The recommended lifetime of a safety harness if 5 years. While some manufacturers keep silent on this topic, in practice, if the harness is used regularly and stored and maintained in standard conditions, its lifetime will not exceed 5 years in most cases.
Sylprotec offers a safety harness inspection service. Find out more by clicking on the Services tab, under the Sylprotec logo at the top of the page.
Any equipment that has withstood a fall or an impact must be scrapped.
Maintenance:
For cleaning, use a gentle soap or detergent and lukewarm water (37°C). Do not use bleach, chlorine, or other abrasive or chemical products. If your harness is too dirty or contaminated, it is time to replace it. Air dry without using heat, in a clean environment. You can accelerate the drying process by wiping the wet harness with a clean absorbent wipe, or by using a fan. Avoid exposing the harness to sunlight and to any sources of contamination.
Suggestion:
To complete your fall protection you will find a range of lanyards, retractable and anchors. Some products are suggested under the "accessories" tab at the bottom of this page.
Other equipment frequently used with this safety harness:
Safety glasses YA12E93101DX
Liberty TA14LR safety helmet and the essential TA14CS chin strap
EPTCONE28 Traffic Cones
Peakworks FPBAG storage bag
The FPL9900 Tool Strap
Data sheet
You might also like