Koala Behr class A harness universal size with Pass-Thru buckles
FPH33101A
$47.90
Dentec Koala Behr class A safety harness in blue polyester, universal size (medium to extra-large). Steel dorsal D-ring, 3 adjustment points and Pass-Thru buckles. Supports up to 310 lb (141 kg).
Return conditions:
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
Koala Behr class A harness with Pass-Thru buckles, universal size
The Dentec Koala Behr safety harness is an economical class A fall-arrest harness built for occasional construction and maintenance work. Fitted with a steel dorsal D-ring, it provides 3 adjustment points (2 on the legs and 1 on the chest) along with a sub-pelvic support strap for a safe, comfortable fit. Available in a universal size, it suits workers from medium to extra-large. Its economical nature is reflected in the appearance of its metal components.
Its webbing is made of blue polyester, a material that offers better resistance to acidic chemicals than nylon. The chest and thigh straps are joined by Pass-Thru buckles, and plastic tips at the end of each strap prevent fraying while making adjustment easy, even with work gloves on.
Koala Behr harness features
- Class A with steel dorsal D-ring
- 3 adjustment points (2 on the legs, 1 on the chest)
- Sub-pelvic support strap
- Pass-Thru buckles
- Blue polyester webbing
- Universal size (medium to extra-large)
- Maximum worker weight supported: 310 lb (141 kg), including clothing, tools and equipment
- Two rigid plastic retaining loops to hang the lanyard when not in use and help prevent tripping hazards
- Built-in drop indicator and hook-and-loop label cover protecting inspection labels from sun, dirt, rain, snow and oils
- Complies with CSA Z259.10 and ANSI Z359.11-2014
- Dentec product code: 16H3310FI (model H33101FI)
Identification and certification labels are sewn onto the back strap of the harness, and the drop indicator makes visual inspection before each use easier.
Safety harness maintenance and inspection
The worker is responsible for a routine inspection before each use, looking for any sign of degradation, wear, malfunction or breakage. The harness must be replaced at the first sign of failure.
In addition, this safety harness should be inspected by a qualified person other than the worker who wears it. Inspection frequency varies by manufacturer: some require it every 90 days, others every 180 days, or yearly. The harder the work and environmental conditions, the more often you should inspect it. The recommended service life of a harness is 5 years. Sylprotec offers a harness inspection service, available under the Service tab at the top of the page. Any equipment subjected to a fall or impact must be taken out of service.
For cleaning, use a gentle soap and clean lukewarm water (37 °C). Do not use bleach or other abrasive or chemical products. Air dry without excessive heat, in a clean environment, and avoid exposing the harness to sunlight or any source of contamination.
Frequently asked questions about the Koala Behr harness
What is a class A harness?
A class A harness has a dorsal D-ring used for fall arrest. It is the most common configuration on construction and maintenance sites.
How much weight can this harness support?
It supports a worker up to 310 lb (141 kg), including clothing, tools and equipment.
How long does a safety harness last?
The recommended service life is 5 years. Any harness that has been through a fall or impact must be taken out of service immediately, regardless of its age.
Fall-arrest equipment suggestions
See also the equipment that completes this harness for a full fall-arrest system: a lanyard with energy absorber (FPL5400), a temporary anchor connector (FPAF075N), a galvanized steel sling (FPAE), a Peakworks storage bag (FPBAG), the mandatory inspection sign (ECO130), a wrist tools strap (FPLA9900), safety eyewear (YA12E93101DX) and a rescue device (FPLR550). Some of these products are also offered under the Accessories tab at the bottom of this page.
FPH33101A
Data sheet
- Product group
- Safety equipment
- Main category
- Personal protection
- Sub category
- Fall protection
- Sub sub category
- Fall protection safety harness
- Name of the product
- Safety harness
- Series of products
- Koala Behr
- Product code
- FPH33101A
- Product use
- Designed for construction work
- Approved/Certified
- Complies with CSA Z259.10-06 and ANSI Z359.11
- Manufacturer
- Dentec Safety Specialists
- Country of origin
- United State of America
- Choice of format
- Universal sizes (medium to extra-large)
- Reusable
- Reusable with careful inspection and proper installation
- Features
- The chest and leg straps are joined by interlocking buckles
- Additional Features
- This harness has 3 adjustment points; 2 on the legs and 1 on the chest
- Comfort features
- Equipped with a sub-pelvic strap providing greater comfort during suspension
- Characteristics of metal parts
- Non-painted metal parts
- Post-suspension relief strap
- Does not include trauma straps
- Includes
- With a steel back ring
- Type of retaining straps
- Auto-resetting lanyard keepers
- Property of the material
- Polyester straps offer better resistance to acidic chemicals
- Classification
- Class A — dorsal D-ring (A) for fall arrest
- Function of attachment points
- Dorsal D-ring: fall arrest
- Material1
- Polyester
- Material2
- Steel
- Washable
- Wash in warm water, 98.60°F/ 37°C. Never use bleach or other abrasive or chemical products on your lanyard. Air dry
- Length (in/cm)
- 13 in / 33.02 cm
- Width (in/cm)
- 8 in / 20.3 cm
- Height (in/cm)
- 2 in / 5.08 cm
- Weight (lb/kg)
- 2 lb / 0.9 Kg
- Sold by
- Unit
- Color
- Blue
- Another packaging available
- By the box of 12 units
- Return conditions
- No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
- Caution
- The maximum weight of the worker wearing this harness is 310 lb / 140.6 kg, including clothing, tools, etc
New
You might also like
Comments (0)
No customer reviews for the moment.
8 other products in the same category:
Customers who bought this product also bought:
Dentec Koala Behr class A safety harness in blue polyester, universal size (medium to extra-large). Steel dorsal D-ring, 3 adjustment points and Pass-Thru buckles. Supports up to 310 lb (141 kg).