- New
Protecta 3M Adjustable Shock-Absorbing Lanyard in Webbing, Large Hook, 6 ft 1341050C
FPL1341050C
$133.60
Protecta 3M adjustable single-leg shock-absorbing lanyard in webbing, 6 ft (1.8 m), large rebar hook, 121 to 310 lb capacity.
Return conditions:
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
Protecta 3M Adjustable Shock-Absorbing Lanyard in Webbing, Large Hook, 6 ft
Protecta 3M manufacturer code: 7012817388, model 1341050C
This Protecta 3M adjustable shock-absorbing lanyard offers the worker an adjustable reach of up to 6 ft (1.8 m), useful when the anchor point varies in height or distance across the job site. The webbing absorbs fall energy through an internal shock absorber that limits forces transmitted to the body, while the large rebar hook allows direct connection to structures or rebar difficult to grip with a standard hook. This lanyard suits workers weighing 121 to 310 lb (54.9 to 140.6 kg) and is made to order by Protecta 3M.
Applications for This Adjustable Lanyard
This adjustable lanyard is used in construction for steel structure assembly, formwork tasks, or any job requiring an anchor point at a variable distance. The adjustment mechanism allows shortening the lanyard to limit free-fall distance when working near edges, then lengthening it as needed to reach a farther anchor.
Key Features
Abrasion-resistant polyester webbing. Built-in internal shock absorber limiting the arresting force transmitted to the worker. Large steel rebar hook at one end for connecting to rebar and structures, spring-loaded snap hook for the harness at the other end. Adjustable length up to 6 ft (1.8 m). Capacity of 121 to 310 lb (54.9 to 140.6 kg), CSA Z259.11 compliant.
Usage Precautions
Any lanyard that has arrested a fall must be removed from service immediately. Inspect the webbing, stitching, and hooks before each use. The anchor point must meet the strength requirements applicable to the intended use (fall arrest, positioning, or restraint).
FAQ: Protecta 3M Adjustable Shock-Absorbing Lanyard
Why choose an adjustable lanyard over a fixed one?
The adjustable length allows the reach to be adapted to the distance to the anchor point, reducing the risk of excessive free fall near edges.
Does the large hook fit all anchor points?
It is designed for rebar and large-diameter structures; verify compatibility with the anchor point before installation.
Is this lanyard reusable after a fall?
No, any lanyard that has arrested a fall must be removed from service immediately, even without visible damage.
What is the weight capacity of this lanyard?
It is designed for workers weighing 121 to 310 lb (54.9 to 140.6 kg), including worn equipment.
Can this lanyard be used for work positioning?
No, this lanyard is designed for fall arrest with a shock absorber; work positioning requires a separate device without an energy absorber.
Complementary Suggestions for This Adjustable Lanyard:
A aerial lift technician connecting with this Protecta 3M lanyard completes personal protection with a high-visibility garment (V6969F), a helmet (TA82) held by its chinstrap (TA80CS), cut-resistant gloves (G120), safety eyewear (YG454) and corded earplugs (OA101) that stay around the neck and cannot drop from height.
For the lanyard to work in a complete fall arrest system, plan a Protecta 3M harness (FPH1191392CA), a Protecta 3M fixed anchor (FPA2190070), a second Protecta 3M complementary anchor (FPA9501683), a 200 ft RollGliss R550 rescue (FPLR5503325) and descent device for emergency lowering, a DANGER barricade tape (ECT3YE7) to cordon off the ground area and the sign (ECO130) reminding that the harness is mandatory.
FPL1341050C
Data sheet
- Product group
- Safety equipment
- Main category
- Personal protection
- Sub category
- Fall protection
- Sub sub category
- Lanyards
- Product code
- FPL1341050C
- Product use
- Adjustable single-leg lanyard with large hook for work at height and rebar anchorage
- Approved/Certified
- Compliant with CSA Z259.11-17 standards
- Manufacturer
- Protecta
- Country of origin
- United State of America
- Format
- 6 ft / 1.8 m
- Reusable
- Reusable with careful inspection and proper installation
- Characteristics of metal parts
- Non-painted metal parts
- Carabiners characteristics
- Equipped with a small spring-loaded carabiner and a large steel carabiner for rebar. Protecta has not disclosed the opening sizes for this model
- Includes
- With a built-in shock absorber
- Property of the material
- Polyester straps offer better resistance to acidic chemicals
- Worker’s weight
- 121 to 310 lb / 54.9 to 140.6 kg (including tools and equipment)
- Material1
- Polyester
- Length (in/cm)
- 17 in / 43.18 cm
- Width (in/cm)
- 13 in / 33.02 cm
- Height (in/cm)
- 8 in / 20.32 cm
- Weight (lb/kg)
- 2.01 lb / 0.913 kg
- Sold by
- Unit
- Caution
- Maximum supported worker weight from 121 lb to 310 lb / 54.9 kg to 140.6 kg, including clothing, tools and equipment
You might also like
Comments (0)
No customer reviews for the moment.
8 other products in the same category:
Protecta 3M adjustable single-leg shock-absorbing lanyard in webbing, 6 ft (1.8 m), large rebar hook, 121 to 310 lb capacity.