Protecta 3M Adjustable Shock-Absorbing Lanyard in Webbing, Large Hook, 6 ft 1341050C

Protecta 3M Adjustable Shock-Absorbing Lanyard in Webbing, Large Hook, 6 ft

Protecta 3M manufacturer code: 7012817388, model 1341050C

This Protecta 3M adjustable shock-absorbing lanyard offers the worker an adjustable reach of up to 6 ft (1.8 m), useful when the anchor point varies in height or distance across the job site. The webbing absorbs fall energy through an internal shock absorber that limits forces transmitted to the body, while the large rebar hook allows direct connection to structures or rebar difficult to grip with a standard hook. This lanyard suits workers weighing 121 to 310 lb (54.9 to 140.6 kg) and is made to order by Protecta 3M.

Applications for This Adjustable Lanyard

This adjustable lanyard is used in construction for steel structure assembly, formwork tasks, or any job requiring an anchor point at a variable distance. The adjustment mechanism allows shortening the lanyard to limit free-fall distance when working near edges, then lengthening it as needed to reach a farther anchor.

Key Features

Abrasion-resistant polyester webbing. Built-in internal shock absorber limiting the arresting force transmitted to the worker. Large steel rebar hook at one end for connecting to rebar and structures, spring-loaded snap hook for the harness at the other end. Adjustable length up to 6 ft (1.8 m). Capacity of 121 to 310 lb (54.9 to 140.6 kg), CSA Z259.11 compliant.

Usage Precautions

Any lanyard that has arrested a fall must be removed from service immediately. Inspect the webbing, stitching, and hooks before each use. The anchor point must meet the strength requirements applicable to the intended use (fall arrest, positioning, or restraint).

FAQ: Protecta 3M Adjustable Shock-Absorbing Lanyard

Why choose an adjustable lanyard over a fixed one?

The adjustable length allows the reach to be adapted to the distance to the anchor point, reducing the risk of excessive free fall near edges.

Does the large hook fit all anchor points?

It is designed for rebar and large-diameter structures; verify compatibility with the anchor point before installation.

Is this lanyard reusable after a fall?

No, any lanyard that has arrested a fall must be removed from service immediately, even without visible damage.

What is the weight capacity of this lanyard?

It is designed for workers weighing 121 to 310 lb (54.9 to 140.6 kg), including worn equipment.

Can this lanyard be used for work positioning?

No, this lanyard is designed for fall arrest with a shock absorber; work positioning requires a separate device without an energy absorber.

Complementary Suggestions for This Adjustable Lanyard:

The worker wearing this lanyard completes their equipment with cut-resistant gloves (G120), safety glasses (YASF203), a safety helmet (TA82) with its chin strap (TA80CS) and a high-visibility shirt (VV50) and earplugs (O1100) for complete personal protection.

For a functional fall protection system, this lanyard pairs with a first harness (FPH140200XCA), a second harness (FPH140201XCAP) for the crew, an anchor (FPA210314X) fixed to the structure, a lanyard (FPL124656X) for a nearby work position, a stainless steel (FPA2103678C) anchor, and a retractable (FPLR3500251) for higher work positions. An anchor (FPA2103678C) provides a compatible roof or metal attachment point. Also plan for a height rescue device Rollgliss R550 controlled descent (FPLR5503325, adapted rope length), and barricade the work zone with a tape DANGER barricade tape (ECT3RE9) and a cone traffic cone (EPTCONE).

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.