DBI-SALA 3M self-retracting lifeline anchor for fixed ladder, galvanized or stainless steel

DBI-SALA 3M self-retracting lifeline anchor for fixed ladders

3M purchase codes: 7100231208, 7100231209, 7100231210, 7012779184. Models: 6100562, 6100563, 6100564, 6100565.

Available in 4 variants: 4 ft or 6 ft, galvanized steel or stainless steel. Select the required length and material from the drop-down menus.

This DBI-SALA 3M self-retracting lifeline anchor adds a practical SRL tie-off point to an existing fixed ladder. It is designed for sites that need to improve fall protection without installing a permanent vertical cable system. The anchor mounts with two U-bolts, in front of or behind the ladder, with left, right or center alignment depending on the ladder layout.

The product is available in 4 ft or 6 ft lengths and in galvanized steel or stainless steel. 3M data lists a 310 lb load capacity, OSHA 1910.27 compliance and compatibility with selected DBI-SALA Smart Lock self-retracting lifelines. The self-retracting lifeline is not included with this anchor.

Benefits of the fixed ladder SRL anchor

• Adds a tie-off point for a self-retracting lifeline on a fixed ladder.
• Installs on the ladder in 5 minutes or less according to 3M documentation.
• Versatile mounting in front of or behind the ladder, with left, right or center alignment.
• Portable solution for permanent or temporary installations.
• Does not require a front D-ring, unlike a fixed vertical cable system.

Technical details for models 6100562 to 6100565

• Product type: ladder anchor for a self-retracting lifeline.
• Load capacity listed by 3M: 310 lb (140 kg).
• Available materials: galvanized steel or stainless steel, depending on the selected variant.
• Available lengths: 4 ft and 6 ft, depending on the selected variant.
• Product colour listed by 3M: silver.
• Country of origin listed by 3M: USA.

Smart Lock SRL and fall protection harness compatibility

3M documentation pairs this ladder anchor with selected DBI-SALA Smart Lock self-retracting lifelines for fixed ladders. Because the SRL references listed by 3M are not confirmed as active Sylprotec product pages in the current database, they are not named or linked here. The final SRL, harness and rescue plan must be validated by a competent person.

Versatile two U-bolt installation on fixed ladders

The anchor can be mounted in front of or behind the ladder so it stays clear of the climbing path. Its reversible support bracket helps hold the system in place during installation and reduces strain on the installer. 3M presents the setup as a simple installation using only two U-bolts.

Applications on fixed ladders and vertical access points

This product is intended for step-through fixed ladders and existing vertical access points in general industry, utilities, agriculture, oil and gas sites, silos, tanks and industrial structures. It is useful when a site needs an SRL anchor point without converting the ladder to a permanent vertical cable system.

OSHA 1910.27 compliance and limits to verify

3M product data lists compliance with OSHA 29 CFR 1910.27 for walking-working surfaces. This statement does not replace a site review of the ladder, height, fall clearance and rescue procedure. Have the application confirmed by a competent person or engineer when required.

Inspection and maintenance of galvanized or stainless ladder anchors

Before each use, inspect the metal body, U-bolts, reversible support bracket, anchor point and hardware. Remove the product from service if it shows deformation, cracks, significant corrosion, fall impact, missing parts or any doubt about the installation. Keep the anchor clean, dry and free from corrosive contaminants.

After outdoor use, wipe metal surfaces and check the hardware before storage. Stainless steel helps in more corrosive environments, but it still requires regular inspection. Formal inspection and repairs must follow 3M instructions and be handled by an authorized person.

FAQ about the DBI-SALA 3M fixed ladder SRL anchor

Is this product a vertical cable system component?

No. The supplied documentation describes it as a self-retracting lifeline anchor for fixed ladders, not as a component of a permanent vertical cable system.

Is the self-retracting lifeline included?

No. The anchor provides the tie-off point. The compatible SRL must be selected separately based on the ladder configuration and jobsite requirements.

What is the difference between galvanized and stainless steel?

Both materials are offered by 3M. Stainless steel is generally preferred where the environment exposes equipment to higher corrosion risk.

Should I choose the 4 ft or 6 ft version?

The choice depends on the ladder layout, anchor point position and required clearance for the SRL. A competent person should validate the installation.

Does this product meet OSHA 1910.27?

Yes, 3M documentation lists OSHA 1910.27 compliance. The complete fall protection system and rescue plan still need to be validated.

Complementary suggestions for fixed ladder SRL anchor installation

To complete personal protective equipment, add a class L safety harness with a sternal ring, cut-resistant gloves for handling hardware, safety eyewear, a protective helmet with a strap, a high-visibility shirt and hearing protection earmuffs.

For work-at-height preparation, also plan for a 3M Rollgliss R550 rescue device and DANGER barricade tape to control the ground area. Compatible Smart Lock SRLs should be validated against 3M documentation and the exact ladder configuration.

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.