RVTR600HIK

3M TR-600 Versaflo powered air purifying respirator for industrial work. Hard hat facepiece and protective factor of 25.

$3,460.60

Return conditions : No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

3M complete TR-600-HIK Versaflo kit for respiratory protection by powered air purifying respirator (PAPR). This piece of equipment gets its NIOSH homologation when assembled with the other components recognized by the manufacturer as part of a complete system. It is recommended for workers in need of respiratory protection in industrial environment. Compatible with 3M series TR-600 filters and cartridges. One kit per case. Please allow 2 to 3 weeks for delivery.

3M TR-600 Versaflo is a new generation powered air purifying respirator which offers a perfect balance between protection and comfort. It combines components which protect not only one’s respiratory tract but also one’s eyes and face. The kit includes among others, a high nominal capacity battery which provides 8h to 18h of run time and many accessories.

Included in the kit: 
- 1 Powered air purifying respirator unit (RVTR602N)
- 1 Filter cover (RVTR6500FC)
- 1 Airflow indicator (RVTR971)
- 1 High durability belt (RVTR626)
- 1 High capacity lithium ion battery; Run time of 8 to 18 hours (RVTR632)
- 1 Single station battery charger kit  (RVTR641N)
- 1 Organic vapours & acid gases cartridge (RVTR6530N)
- 2 Spark arrestors (RVTR662)
- 2 Prefilters (RVTR6600)
- 1 Hard hat facepiece (RM307)
- 1 Heavy duty polyurethane breathing tube; Length: 525 to 850 mm (RBT30)
- 1 High temperature breathing tube cover (RBT926)

3M manufacturer’s code: TR-600-HIK

3M RVTR602N Versaflo powered air purifying respirator unit features:
PAPRs, powered air purifying respirator are systems made to blow filtered air into the respiratory equipment, which provides air automatically rather than mechanically such as regular respirators. 3M RVTR602N motor/blower paired with 3M RM307 facepiece differs from other PAPRs by its lightness, its ergonomic and its versatility which allows everyone, even bearded men to be protected when well installed. This type of equipment offers a protection up to 25 times the permissible exposure limit set by the CNESST or any other government regulation applicable. PAPRs minimize the effort put into breathing and can reduce build up heat inside the facepiece. It features a smart engine which adapts accordingly to the filters or cartridges in use. It is also equipped with an alarm system - one audible and one LED – which alert the user to either a low battery or low airflow. The powered unit has three airflow settings: standard, medium and high flow. The engine starts automatically at the standard flow and the user can change the settings afterwards accordingly to his needs. This powered unit allows one to use combined filter/cartridges, which means it’s more powerful than previous equipment. Please note that this equipment is not intrinsically safe. This PAPR contains no natural rubber latex.

RM307 facepiece features:
The RM307 facepiece consist of a hard hat, a visor and a fireproof faceseal which makes it the number 1 choice for intensive industrial work requiring head gear. The hard hat is provided with a six point head suspension and a rotary ratchet mechanism. It meets ANSI Z89.1-2003 impact protection standards and is classified type 1 and class G which is approved for industrial work. The hard hat part is made of hard fireproof polyester. Please note that it is not yet CSA approved.

The RM307 meets ANSI Z87.1-2010 standards regarding eye and face protection. 3M RM307 is equipped with a premium visor and a flame resistant faceseal. RM927 visor is made of an anti-scratch covered polycarbonate resistant to impacts. A RM928 peel-off visor cover comes with the complete system. This piece features an easily adjustable deflector which allows users to direct the location of the airflow inside the headgear for increased control and comfort.

The RM307 is equipped with a deflector to send the air flow in different directions, i.e., toward the face or the visor, whichever is best. It is also equipped with a flame resistant faceseal which not only ensure an airtight environment, but protects one from flames for a limited time. Please note that to ensure airtight sealing, one must avoid the contact of facial hair with the faceseal. Failing that, the manufacturer concedes that the equipment might not meet NIOSH standards. 

Use for: 
This type of respiratory protection system is recommended for work that will loosen solid particles, vapors and gases in the air such as work in metal processing manufactories and assembly plants. It’s recommended for polishing, surfacing and smelting. The HEPA filters which comes with the kit protect one from most airborne particles with an 99,97% efficiency.

Do not use for:
It can neither ensure the user intrinsic safety in an environment representing an explosion risk. It is strongly discouraged to wear any kind of respirator for application with sandblasting. It is also highly advised to stay away from environment that exceed 25 times the permissible exposure limit set by the CNESST or any other government regulation applicable. One should never use a respirator in an oxygen deprived environment (an atmosphere with less than 19,5 % oxygen).

Maintenance and service life:
For a safer performance, manufacturer’s recommendation must be followed. 3M recommends an inspection of the respiratory equipment before each use; to wash the respirator after each use; and to store the respirator back to its packaging.

One should never wash its respirator with any type of solvents since they can weaken some components which can affect the efficiency of the equipment. Filtering elements must never be immersed in water. The motor/blower and the battery may now be immersed if equipped with the RVTR653 cleaning and storage kit. 

Type of productSafety equipment
Main categoryPersonal protection
Sub categoryRespiratory protection
Sub sub categoryTR-600 Versaflo head-mounted powered air purifying respirator
Name of the productComplete Versaflo (Tm) kit
Series of productsVersaflo (Tm) TR-600
Product codeRVTR600HIK
Approved/CertifiedMeets NIOSH
Manufacturer3M
Country of originUnited State of America
ReusableReusable with prior hygienic measurement
Battery typeHigh-capacity Lithium-ion rechargeable battery
Battery life8 to 18 hours
Inherently safeNot inherently safe
Respirator StylePowered air purifying respirator
Protection factorProtection factor of 25
Faceseal membraneWith faceseal
Cartridge or Filter IncludedFilter against organic vapors and acid gases + HEPA; against non-oily or oily particles
Protection against gases and vaporsProtects against organic vapors and acid gases + HEPA; against non oily or oily particles
Cartridge color codeMagenta/Yellow
Mounting typeWaistband installation
Facial partHelmet, visor and bib assembly
Visor tintTransparent
Type of connectionBack installation
Type of hoseCorrugated flexible and lightweight material for greater comfort ans less fatigue
Hose materialPolyurethane
Hose length20 5/8 in / 52.5 cm when compressed, 33 3/8 in /85 cm when stretched
MaterialSee items separately
WashableWipe with a damp cloth, do not immerse motor and battery in water unless using the RVTR653 Cleaning Protection Kit
Length (in/cm)20.35 in / 51.7 cm
Width (in/cm)14.21 in / 36.1 cm
Height (in/cm)14.21 in / 36.1 cm
Weight (lb/kg)15.36 lb / 6.967 Kg
Sold byUnit
ColorWhite/Beige/Black
Another packaging available18 units per pallet
Shipping restrictionDo not ship by air freight
Return conditionsNo returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

Accessories

30 other products in the same category: