- New
This item is not stocked: allow 18 to 21 days for delivery.
Brady 179480 single pole tandem circuit breaker lockout, red, sold individually. It clamps onto one switch of a tandem breaker: you power down only the circuit you need, without shutting off the neighbouring circuit. Its narrow profile fits side-by-side switches, its thumbwheel secures it without tools and its sliding cover prevents removal once the padlock is applied. It accepts one padlock with a shackle up to 0.28 in.
This item is not stocked: allow 18 to 21 days for delivery.
Brady model: 179480. A tandem circuit breaker houses two switches in the same unit. This lockout clamps onto only one of them: you power down just the circuit you are working on, and the neighbouring circuit stays in service. Its proprietary thumbwheel secures it with a simple twist, without tools, and its sliding cover prevents removal once installed. It accepts a padlock with a shackle diameter up to 0.28 in (7.1 mm), according to the manufacturer's description.
This lockout is intended for electricians and maintenance staff who work on a specific circuit of a distribution panel: replacing a light fixture, repairing an outlet or servicing equipment fed by a tandem breaker. To equip a team, Brady offers the same lockout in packs of 6: the Brady single pole tandem breaker lockout (CAC179481), pack of 6.
| Characteristic | Value |
|---|---|
| Height | 0.98 in / 2.5 cm |
| Length / depth | 2.34 in / 5.94 cm |
| Width | 0.5 in / 1.27 cm |
| Published model dimensions (H X W X D) | 0.96 in H X 2.34 in W X 0.48 in D |
| Packaged dimensions | 0.48 X 2.34 X 0.96 in |
| Packaged weight | 0.25 lb / 0.113 kg |
| Main material | Plastic |
| Secondary material | Steel (adjustment screw) |
| Manufacturer | Brady |
| Country of origin | China |
| Sold by | Unit |
| Characteristic | Clamps onto one switch on a tandem breaker |
| Technical details | Sliding cover against unauthorized removal |
Open the switch concerned according to your written procedure. Place the lockout on that switch, turn the thumbwheel to clamp it, close the sliding cover and apply your padlock, then your lockout tag. Verify the absence of voltage before starting work. Keep the lockout clean and replace it if it is cracked or if the thumbwheel no longer clamps.
No. It clamps onto a single switch, so you can shut off only the circuit concerned.
No. The thumbwheel is turned by hand to clamp the lockout onto the switch.
One padlock, with a shackle diameter up to 0.28 in (7.1 mm) according to the manufacturer's description.
Individually. The pack of 6 version is offered on a separate listing.
The lockout is not stocked: allow 18 to 21 days for delivery.
For the electrician working in a distribution panel, depending on the hazards of the job, plan for Zenith clear-lens safety glasses (YAZ200) compatible with prescription eyewear, Horizon nylon knit gloves (G051144), Pioneer FR-Tech navy blue flame-retardant cargo pants (V7764), EARSOFT regular earplugs (OA1252) and Pioneer FR-Tech orange flame-resistant cargo trousers (V7765).
For personal lockout, the padlock (CA1ZKD1) model with a Zenex body and nylon shackle provides a keyed-different option. If your procedure instead calls for an aluminium body, select the red model (CA1ARG) with a 1/4 in shackle, checking its fit in the device. Complete the identification with the tags (CAET5) bearing the French DANGER NE PAS OPÉRER message. These accessories complement the workstation’s lockout program; padlocks are not included with the device.
Data sheet
Specific References
You might also like