The 3M Adflo high-efficiency particulate filters are replaced in the Adflo powered air purifying respirator and capture welding fumes and particles. Offered in a pack of 2 filters, a case of 20 filters or a case of 80 filters, from a single welder to a whole shop. They are always used with the Adflo prefilter and spark arrestor (R15/0009) and do not protect against gases or vapours. NIOSH colour code magenta, service life of 60 months.
Pack of 2 : Delivery time: varies; contact us.
Case of 20 : Delivery time: 7 to 7 business days.
Case of 80 : Delivery time: 7 to 7 business days.
3M manufacturer code: listed for each format in the format table below
Available in 3 formats, from the pack of 2 filters to the case of 80; choose yours in the format table below.
| Format | Sylprotec code | Manufacturer model | Manufacturer product number |
|---|---|---|---|
| Pack of 2 | R15-0299-2-2 | 7100245141 | |
| Case of 20 | R15-0299-2-20 | 15-0299-99X20 | 7100245142 |
| Case of 80 | R15-0299-2-80 | 15-0299-99X80 | 7100245233 |
The 3M Adflo 15-0299 high-efficiency particulate filters are the replacement filters of the Adflo powered air purifying respirator. They are offered in three formats: the pack of 2 filters for one unit, the case of 20 filters and the case of 80 filters for shops that equip several welders and change filters on a regular schedule. Installed with the prefilter and spark arrestor, they capture welding fumes and particles before the air is delivered to the helmet. These filters protect against particles only: gases and vapours require the appropriate Adflo cartridge.
The HE filter is the consumable that captures welding fumes and particles before the air is delivered to the helmet. The same filter is offered in three formats, from the welder who keeps a spare filter to the shop that changes the filters of a whole fleet on a regular schedule.
The blower's five-step loading indicator shows when to replace it, which avoids discarding a filter too early or keeping it too long.
These filters are intended for the Adflo powered air purifying respirator; a half-mask P100 filter does not replace them. 3M links them to the 9100 MP, 9100 Air, 9100 FX-Air welding helmets, the M-400SG series and the G5-01 used with the Adflo. They are fitted with the Adflo prefilter and spark arrestor.
The HE filters serve welders equipped with the Adflo in the welding industry, manufacturing, industrial maintenance and construction, for fumes and particles from welding and grinding processes. 3M links them to the 9100 MP, 9100 Air, 9100 FX-Air welding helmets, the M-400SG series and the G5-01 used with the Adflo. The pack of 2 suits a welder who keeps a spare filter, the case of 20 a small crew and the case of 80 fleets of units.
Each format contains only Adflo high-efficiency filters: 2, 20 or 80 filters depending on the chosen format. Not included: the prefilters, the spark arrestor and the filter cover, sold separately.
Remove the filter cover, place the spark arrestor, the prefilter and then the HE filter, aligning its ribs with the slots on the latch side, without pressing on the grid, and relock the cover until it clicks. Before each use, check that the filter media is intact and dry and that the filter gasket is present, clean and undistorted, then check the airflow, as part of the respiratory protection program.
The filter is part of a NIOSH-approved Adflo system: it protects only in a complete approved configuration, with the specified headtop and breathing tube. It captures particles and does not protect against gases or vapours. The loading indicator only signals particle loading and gives no information on service life against gases and vapours. Between 5000 feet and 10,000 feet of altitude, the Adflo is used with the HE filter alone. Do not use the Adflo in an oxygen-deficient atmosphere, in conditions immediately dangerous to life or health, or in a flammable or explosive atmosphere.
| Specification | Detail |
|---|---|
| Product type | Filter |
| Protection type | Particles |
| Compatible respirator | 3M Adflo powered air purifying respirator |
| NIOSH colour code | Magenta |
| Service life | 60 months |
| Compatible welding helmet | 9100 MP ; 9100 Air series ; 9100 FX-Air ; M-400SG series ; G5-01 |
| Approval | NIOSH approved in the approved Adflo configuration |
| Part type | Consumable |
Before each use, check that the filter media is intact and dry and that the filter gasket is present, clean and undistorted. The HE filter cannot be cleaned: do not tap it or blow it out with compressed air. Replace it if damaged or wet, when the red lights of the loading indicator come on, if battery run time becomes too short or if the airflow alarm is triggered, and change the prefilter at least as often. Service life stated by 3M: 60 months.
The same Adflo high-efficiency filter is offered in a pack of 2 filters, a case of 20 filters and a case of 80 filters; the codes of each format appear in the formats table.
The 3M Adflo powered air purifying respirator. It is not a half-mask P100 filter.
No. It protects against particles. For certain organic vapours and acid gases, add the appropriate Adflo cartridge, always with the HE filter, prefilter and spark arrestor, according to the SDS and the risk assessment.
No. 3M prohibits cleaning the HE filter and prefilter by tapping or blowing air: the membrane can be damaged and let particles through.
If it is damaged or wet, when the red lights of the loading indicator come on, if battery run time becomes too short or if the airflow alarm is triggered.
The welder under an Adflo wears clear Virtua Max safety glasses (YA11329) under the helmet, Astro (YAU2500) OTG 3001 glasses over prescription glasses or SecureFit (YASF401) SF401 glasses. The side-split and full-grain leather welding gloves (G602) protect the hands while changing filters, and the 26 dB behind-the-head H7B earmuff (OPH7B) is worn under the welding helmet.
The HE filter is fitted with the 15-0009 spark arrestor, sold as a pair (R15/0009), in the 35-1099-81 filter cover (R35-1099-81); the high-efficiency starter kit (R15-1101-99) groups filters and prefilters to get started. The 15-0099-05 flow indicator (R15-0099-05) checks airflow after each change, and the 15-0499 cartridges (R15/0499-2) stack on the filter against certain gases.
Data sheet
Specific References
You might also like