- New
The 3M Adflo 35-1099-17 kit contains one lithium-ion battery, one smart charger, one high-efficiency particulate filter and six prefilters for the Adflo powered air purifying respirator, according to 3M. The battery gives 10 to 12 hours of use with a new HE filter and recharges to 80% in about 3 hours. Ideal to replace an end-of-life battery or prepare a second set. The Adflo blower, breathing tube and headtop are not included.
Delivery time: varies; contact us.
3M manufacturer code: 7100025243, model 35-1099-17
The 3M Adflo 35-1099-17 kit groups the power supply and basic consumables of the Adflo powered air purifying respirator: one lithium-ion battery, one smart charger, one high-efficiency particulate filter and six prefilters, according to the 3M description. It is used to put back into service an Adflo whose battery is at end of life or to equip a second battery set for long shifts. The Adflo instructions state 10 to 12 hours of use with a new charged battery and a new HE filter. The blower, breathing tube and headtop are not included.
The kit groups three Adflo functions in a single item: power with the lithium-ion battery, recharging with the smart charger and filtration with one HE filter and six prefilters. It puts back into service a unit whose battery is at end of life or prepares a second set for long shifts.
A second battery charged in advance lets a shift finish without stopping work during recharging, which reaches 80% in about 3 hours.
All kit items are intended for the 3M Adflo powered air purifying respirator. The battery fits on the Adflo blower and is recharged only with the Adflo charger. The HE filter and prefilters go in the blower filter cover, with the spark arrestor.
The kit is intended for welders and Adflo fleet managers in industrial maintenance, heavy infrastructure and design and construction. 3M specifies it for grinding, sanding, welding, facility maintenance, machine operation and assembly. A second battery charged in advance lets a long shift finish without stopping work during recharging.
| Component | Function | Quantity |
|---|---|---|
| Adflo lithium-ion battery | Powers the blower | 1 |
| Adflo smart charger | Recharges the battery | 1 |
| High-efficiency filter | Particle filtration | 1 |
| Prefilter | Protects the HE filter | 6 |
Not included: the blower, breathing tube, headtop and belt.
Connect the charger output to the battery socket, then the charger to a 110 to 120 V AC outlet; a steady yellow light indicates fast charging and steady green, a ready battery. To install it, hook the left edge of the battery at the bottom of the blower and push until the two clicks. Place the spark arrestor, a prefilter and the HE filter in the filter cover, then check airflow and the low airflow alarm before entering the work area, as part of the respiratory protection program.
Do not charge the battery with an unapproved charger, in a closed cabinet without ventilation, in a hazardous location or near intense heat. Do not use, charge or store it outside the stated temperature ranges. The 10 to 12 hour run time applies to a new charged battery and a new HE filter; it is 5.5 hours with the organic vapour and acid gas cartridge. The HE filter does not protect against gases or vapours. Do not ship the battery by air; dispose of a used battery according to local regulations, without crushing, dismantling or incinerating it. The Adflo is not intrinsically safe.
Charge the battery on receipt, only with the Adflo charger, indoors, in a ventilated and supervised area, between 0 °C (32 °F) and 40 °C (104 °F); it reaches 80% in about 3 hours and 100% in about 6.5 hours. Disconnect it after full charge: 3 to 4 days of maintenance charging at most. Store the battery between -20 °C (-4 °F) and 45 °C (113 °F), relative humidity below 85%, and recharge it every 3 months if unused. Do not let water enter the housing and inspect it before each charge; service life of about 500 charges.
According to the 3M description: 1 lithium-ion battery, 1 smart charger, 1 high-efficiency particulate filter and 6 prefilters for the Adflo.
A rechargeable Adflo lithium-ion battery. The instructions state 10 to 12 hours of use with a new charged battery and a new HE filter, and a service life of about 500 charges.
No. The kit supplies the battery, charger and filters; the Adflo blower, breathing tube and headtop are not included.
Charge with the Adflo charger only, indoors, in a ventilated and supervised area, between 0 °C (32 °F) and 40 °C (104 °F). Disconnect the battery once charged: 3 to 4 days of maintenance charging at most.
The HE filter captures particles; the prefilters sit in front of it to protect it. They do not protect against gases or vapours and do not supply oxygen.
The welder under an Adflo wears the Pioneer 7762 flame-resistant cargo pants (V7762), with Virtua Max 11872 safety glasses (YA11872) with foam gasket under the helmet or clear Zenith (YAZ200) glasses over prescription glasses. The Endura goatskin and Kevlar gloves (G625) suit MIG and TIG work, and the 32 dB Laser Lite earplugs (OA1101) limit shop noise.
For workshops managing several Adflo assemblies, the N6 charger (R35-0099-08N6) provides six ports. The flowmeter (R15-0099-05) serves the prescribed pre-use checks, while the arrestor (R15/0009) is another maintenance part for the Adflo respirator.
Data sheet
Specific References
You might also like