- New
The 3M Speedglas 06-0202-20 starter kit groups five outside protection plates, two 9100X inside protection plates and one sweatband for the 9100 MP welding helmet. It suits the helmet fitted with the 9100X auto-darkening filter (R06-0000-20). The plates protect the filter from sparks and grinding debris; 3M advises changing the outside plates every week and the inside plates every month. Sold individually to start a helmet or restock the station reserve.
Delivery time: 28 business days.
3M manufacturer code: 7010341131, model 06-0202-20
The 3M Speedglas 06-0202-20 starter kit brings together the consumables that keep a 9100 MP welding helmet ready for work: five outside protection plates, two 9100X inside protection plates and one sweatband. The plates protect the filter from sparks and grinding debris; when they become pitted, scratched or can no longer be cleaned, replacing them gives the welder clear vision again. It is intended for the 9100 MP helmet fitted with the 9100X auto-darkening filter. Sold individually, it lets you start a new helmet or restock the station reserve.
Protection plates are the parts that wear fastest on a welding helmet: spatter pits them, grinding scratches them and vision becomes blurred. The 06-0202-20 kit groups the outside plates, the 9100X inside plates and the sweatband of the 9100 MP in a single item, which simplifies ordering and reserve management.
Its inside plates are those of the 9100X filter: taking the kit that matches the installed filter avoids fitting a plate of another size in front of the eyes.
3M intends this kit for the 9100 MP welding helmet fitted with the 9100X auto-darkening lens (R06-0000-20). For a 9100 MP fitted with the 9100XX filter, the 06-0202-30 kit contains the 9100XX inside plates. The 06-0201-20 9100X kit (R06-0201-20) sold on another product page is a separate item.
This kit serves welders who wear the 9100 MP helmet with hard hat in construction, heavy infrastructure projects and industrial maintenance. The plates follow the helmet through stick, TIG and MIG welding, grinding, assembly and facility maintenance. Shop supervisors keep it in reserve to change plates on schedule without taking a helmet out of service.
| Component | Quantity |
|---|---|
| Outside protection plate | 5 |
| 9100X inside protection plate | 2 |
| Sweatband | 1 |
Sold individually. Not included: the 9100 MP helmet and the 9100X welding filter.
The outside plate goes on the spatter side, in front of the 9100X filter; the inside plate sits on the welder's side, between the filter and the eyes. The sweatband attaches to the front of the 9100 MP headband. After each change, check that the plates are properly seated and that vision through the filter is clear before welding.
The protection plates do not filter arc radiation: optical protection comes from the welding filter, sold separately. The 9100X inside plates do not suit the 9100XX filter. Do not use a pitted, scratched or overly dirty plate: it reduces vision quality.
Clean the plates with a soft cloth. 3M recommends replacing outside plates at least once a week and inside plates once a month, or sooner if they are pitted, scratched or too dirty. Change the sweatband as soon as it becomes odorous or is no longer hygienic. At each change, check that the plate is properly seated in front of the filter.
The 9100 MP welding helmet fitted with the 9100X auto-darkening filter, according to 3M.
Five outside protection plates, two 9100X inside protection plates and one sweatband.
Both kits target the 9100 MP and contain the same quantities. Only the inside plates differ: 9100X in the 06-0202-20, 9100XX in the 06-0202-30. Choose the one that matches the installed filter.
3M recommends replacing outside plates at least once a week and inside plates once a month, or sooner if they are pitted, scratched or too dirty.
No. The kit contains only the plates and the sweatband; the 9100X auto-darkening filter is ordered separately.
The welder wearing the 9100 MP keeps clear Privo 12261 safety glasses (YA12261) under the shield, Astro (YAU2500) OTG 3001 glasses over prescription glasses or clear economy Cee-Tec (YA12E93101) glasses, and puts on the 11 in side-split and full-grain leather welding gloves (G602). The 18 in Proban flame-resistant sleeves (VS23) protect the forearms.
To maintain the 9100MP, replace the face seal (R27-0099-28) and outer plates (R27-0099-68) when damaged. The grinding visor (R06-0700-54), supplied in a pack of five, also provides a replacement for that part of the shield.
Data sheet
Specific References
You might also like