compare_arrows

3M 7993 full leather welding shroud

Reference : R7993
$476.85

The 3M 7993 full leather welding shroud is used with the 3M 7000 series reusable full facepiece to cover the head and shoulders against sparks and spatter. The instructions for the 7990 clip-on shield kit (R7990) list it as an accessory: full facepiece, welding shield and shroud thus form continuous respiratory and face protection. A 3M approved replacement part, it installs easily. Sold individually, in black; facepiece and shield sold separately.

Delivery time: 31 business days.

Quantity

Compare

3M 7993 full leather welding shroud

3M manufacturer code: 7000126021, model 7993

The 3M 7993 full leather welding shroud is used with the 3M 7000 series reusable full facepiece to cover the head and shoulders during welding. The instructions for the 7990 clip-on welding shield kit list it as an accessory of this setup: the full facepiece protects the airways, the 7990 shield adds the welding lens and the leather shroud stops the sparks and spatter that fall on the head, nape and shoulders. A genuine 3M part, it installs easily and extends equipment service life. Sold individually, in black.

Why choose the 3M 7993 leather welding shroud

With a full facepiece and a welding shield, the head, nape and shoulders remain exposed to sparks and spatter. The 7993 black leather shroud covers these areas and completes the setup listed in the 7990 kit instructions.

It is a 3M approved replacement part that installs easily. It differs from the textile hoods of Speedglas helmets: it is made of leather and intended for the 7000 series full facepiece.

Compatibility of the 3M 7993 leather welding shroud

The shroud is used with the 3M 7000 series reusable full facepiece, such as the 7800S, and pairs with the clip-on welding shield (R7990) fitted on the facepiece lens frame. The 3M portal states that it is not compatible with powered air purifying respirator (PAPR) systems.

Applications for the 3M 7993 leather welding shroud

The shroud is intended for welders who wear a 3M full facepiece with welding shield, especially for assembly and mechanics, facility maintenance and welding. It suits environments where full-facepiece respiratory protection is required during welding, such as shipyards or refineries.

Features and benefits of the 3M 7993 leather welding shroud

  • Full leather shroud that covers the welder's head and shoulders.
  • Compatible with the 3M 7000 series reusable full facepiece.
  • Accessory listed in the 7990 clip-on welding shield kit instructions.
  • Easy installation, 3M approved replacement part.
  • Sold individually, in black.

Contents and packaging of the 3M 7993 leather welding shroud

One full black leather welding shroud, sold individually. Not included: the full facepiece, the welding shield, the lens and the filters.

Installation and checks for the 3M 7993 leather welding shroud

First fit the full facepiece and check its seal, then install the shroud so that it covers the head and drops over the shoulders without pulling on the harness. Before welding, check that the shroud hinders neither vision nor the filter connections.

Use limitations of the 3M 7993 leather welding shroud

The shroud provides no eye protection and is not a respirator: respiratory protection comes from the full facepiece and its filters, eye protection from the welding shield. It is not compatible with PAPR systems. Burned, holed or hardened leather no longer protects: replace the shroud.

Specifications of the 3M 7993 leather welding shroud

  • Product type: Welding shroud
  • Material: Leather
  • Product colour: Black
  • Series type: 3M 7800 series respirators
  • Product series: 7000
  • Eye protection: No
  • Compatible with PAPR systems: No
  • Recommended applications: Assembly and mechanics ; Facility maintenance ; Welding

Care and service life of the 3M 7993 leather welding shroud

Check the leather and fasteners regularly: replace the shroud as soon as it is burned, holed or hardened. Brush off cooled spatter and keep the leather away from solvents. 3M recommends checking equipment often to spot worn or damaged parts.

FAQ: the 3M 7993 leather welding shroud

Which areas does the 7993 shroud cover?

The head and shoulders, according to the 3M description.

Which series is the shroud intended for?

The 3M 7000 series reusable full facepiece, such as the 7800S, usually fitted with the 7990 clip-on shield kit.

Is the shroud compatible with a PAPR?

No. The 3M portal states that this shroud is not compatible with powered air purifying respirator (PAPR) systems.

Does the shroud include a shield or a facepiece?

No. It is sold alone; the 7800S full facepiece and the 7990 shield kit are ordered separately.

How are the leather and fasteners checked?

Before each use, check that the leather is not burned, holed or hardened and that the fasteners hold the shroud properly. Replace it at the slightest damage.

Complementary suggestions for the 3M 7993 leather welding shroud

Under the shroud, the welder wears the orange Pioneer 7743 FR-Tech flame-resistant shirt (V130) with the 7764 flame-resistant cargo pants (V7764). The Endura goatskin and Kevlar gloves (G625) suit TIG and MIG work, and the 25 dB H7B earmuff (OPH7B) reduces noise provided it does not compromise the facepiece seal, as do the polyurethane Push-Ins (OA1001C) earplugs.

The shroud is used with the 3M 7800 series full respirator (R7800). The 7093 P100 filters (R7093-12), supplied in a box of 12, address particles in certain welding fumes, not gases or vapours; select an approved configuration for the contaminants and fit test. The 3M 504 cleaning wipes (R504) provide facepiece maintenance.

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.

R7993

Data sheet

Product group
Safety equipment
Main category
Personal protection
Sub category
Eye and face protection
Sub sub category
7800S / 7000
Name of the product
Leather welding shroud
Series of products
7800 series respirator
Product code
R7993
Sort by keywords
Faceshields
Product use
For welding work
Approved/Certified
None
Manufacturer
3M (TM)
Country of origin
United States of America
Features
Leather shroud covering the head and shoulders of welders wearing a 3M 7000 series full facepiece
Useful life
Inspect before each use. Replace if excessively worn or damaged
Compatibility of the facial part
3M 7000 / 7800S full facepieces
Material
Leather
Length (in/cm)
11.3 in / 28.7 cm
Width (in/cm)
7 in / 17.8 cm
Height (in/cm)
2.5 in / 6.35 cm
Weight (lb/kg)
1.021 lb / 0.463 kg
Availability
Please note: Available only on special order
Sold by
Unit
Color
Black
HS Code
9020000000
Care and maintenance
Check leather and fasteners; replace if burned, holed or hardened; avoid solvents.
Return conditions
Not returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

Specific References

UPC
051138215385
MPN
7993

You might also like

Comments (0)
No customer reviews for the moment.