D-CAPTURE universal dust capture adaptor for drills. Compatible with most brands and models of drills. This dust shroud may be used on a hole up to 2 in (5 cm) in diameter. This equipment requires an HEPA vacuum. Once assembled, the equipment sucks in the dust as the hole is being drilled leaving no dust behind.
This dust captor adaptor is generally used for work with materials containing asbestos or likely to contain some. Of course, we’re talking about low hazard abatement work. This equipment prevents the possible dispersion of hazardous dust such as asbestos and silica, and reduces the time of decontamination.
This dust captor is a useful tool to conduct a sampling. Simply fit a 12 inches drill bit on to the saw, link up the whole gear to a HEPA vacuum and perform the needed sampling safely. One may use this type of equipment to drill in gypsum, cement, wood, asbestos panels or any other hazardous materials.
Dust can cause many health problems, including skin irritation, respiratory problems and allergic reactions. The lungs are particularly vulnerable, as they are constantly exposed to the hazards of the dust we breathe. It’s therefore important to take preventive measures, which is why we offer you this dust collector, because for Sylprotec, your safety is our priority Tm.
This dust collector is the professional contractor’s n°1 choice for dust control when using a hand-held drill, to provide a dust-free working environment. This device captures 99% of the dust generated during drilling. Its quick and easy installation makes it an indispensable accessory. The transparent shell gives contractors the visibility they need for optimum control.
Our drill dust collector is a smart buy for several reasons. Firstly, it can help reduce the amount of dust and debris generated during drilling, which can improve air quality in your workspace and reduce the health risks associated with dust inhalation, which is why we offer this product. The number of workers affected by respiratory diseases involving asbestos fibers and silica is significant. These diseases are incurable, and the workers concerned unfortunately only realize this after many years. Often at the end of their careers, when they should be enjoying life.
Please note that for asbestos and silica removal work, you’ll need a HEPA vacuum cleaner suitable for the job. HEPA vacuums should, among other things, have passed a DOP test. Contact our customer service department for further details.
This type of dust collector is normally used when working with products containing asbestos or silica. This is moderate-risk work. It prevents the dispersion of asbestos fibers and reduces the time required for decontamination.
Maintenance and service life:
To maintain your dust collector, wipe each element with a sponge soaked in water and a mild cleaning product, then dry each element with a clean cloth. The use of a respirator (mask) of at least category N95 is recommended.
Other similar models you may need:
SAH7, dust collector for drill with 1–3/8″ (3.5 cm diameter) hole.
SAH8, a dust collector for drills or cutters with an adjustable diameter from 1″ to 4″ (2.5 cm to 10 cm) is also suitable for drills with large bits.
SAH9, dust collector for drills and saws with a maximum diameter of 8″ (20 cm).
SAH10, dust collector kit for gas saws.
SAH15, D-Capture universal dust collector set for drills (2.5 cm diameter).
SAH18, universal dust collector set for reciprocating saws.
SAH19, CutBuddie 4″ to 5″ grinder dust collector kit.
Need additional safety equipment? See items; (SAD6) industrial vacuum cleaner with 8gal tank (U.S.). (R8233) P100 respirator with 3M Cool Flow™ valve against oily particles & certain hazardous particles. (SATB) Blue polyethylene adhesive tape. For sealing openings where asbestos is present (SAHFIB) Fiberspray aerosol product used as a temporary or permanent encapsulant for small surfaces 8 oz. size.
See "Accessories" at bottom of page. If you're looking for work equipment, check out the following products: the regulatory poster for work involving asbestos (EAMIANTE), bags for disposing of asbestos-containing construction waste, the bilingual yellow bag (SAC2640) for asbestos waste and its complement, the transparent bag (SAC2640C) to go over the yellow bag.
|Type of product
|Name of the product
|Universal dust collector for drills
|Country of origin
|This dust collector is compatible with drills with bits or dies up to 2" (5 cm)
|This type of dust collector is normally used when working with products containing asbestos or silica. It has the advantage of reducing risks to moderate or low levels
|This device captures 99% of the dust generated during cutting. It prevents the dispersion of asbestos fibers and reduces the time required for decontamination
|Feature that facilitates use
|This product is ideal for construction and renovation as it can vacuum dust from asbestos, concrete, drywall (Gyproc), stone, etc
|This dust collector connects to drills with bits or dies up to 2" (5 cm)
|Wipe each element with a sponge soaked in water and a mild cleaning product, then dry each element with a clean cloth. It is recommended to use at least a category N95 mask
|16 in / 40.6 cm
|10.50 in / 26.67 cm
|9 in / 22.9 cm
|2.3 lb / 1 Kg
|Made in Canada
|No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page