- New
Moldex R95 M/L respirators, box of 10, 2840R95
R2840
$127.65
This item is not kept in stock. Please allow 15 days for delivery.
Moldex 2840R95 respirators approved to NIOSH R95, with a Dura-Mesh shell, Ventex valve and buckled HandyStrap. Carbon layer for nuisance-level relief only. Medium/large size, box of 10. Where oil mists are present, do not use for longer than one 8-hour shift and discard no later than 8 hours after first use, or sooner if conditions require. Nuisance-level ozone and organic vapour relief applies only to concentrations below the OSHA permissible exposure limit (PEL); this respirator does not replace a gas/vapour cartridge.
Return conditions:
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
Moldex R95 M/L respirators, box of 10, 2840R95
Manufacturer code Moldex: 2840R95, model 2840R95
This item is not kept in stock. Please allow 15 days for delivery.
The Moldex 2840R95 is a cup-shaped disposable respirator with a Dura-Mesh shell, Ventex valve and buckled HandyStrap. Approved to NIOSH R95, it filters at least 95% of oil and non-oil particulate aerosols. Its carbon layer provides nuisance-level ozone and organic vapour relief only: it does not replace a gas/vapour cartridge. This medium/large model is sold in a box of 10 for workshop stations where the assessment selects this protection.
Features of the Moldex 2840R95 respirators
- NIOSH R95 approval
- Cup-shaped Dura-Mesh shell
- Ventex valve
- Buckled HandyStrap
- Carbon layer for nuisance levels only
Applications of the Moldex 2840R95 respirators
Consider for machining, metalworking and workshop maintenance when assessment identifies oil or non-oil particulate aerosols suited to R95 protection. Employer-arranged fit testing and a seal check when donned remain necessary. Do not select this mask as gas/vapour protection for spray painting.
Care of the Moldex 2840R95 respirators
The 2840R95 is disposable: do not wash the shell or filtering layer. Discard after use according to Moldex instructions and the workstation programme. Immediately replace a damaged, contaminated or difficult-to-breathe-through mask. Keep unused masks dry and inspect the strap, buckle and valve before donning.
Where oil mists are present, do not use for longer than one 8-hour shift and discard no later than 8 hours after first use, or sooner if conditions require. Nuisance-level ozone and organic vapour relief applies only to concentrations below the OSHA permissible exposure limit (PEL); this respirator does not replace a gas/vapour cartridge.
FAQ: the Moldex 2840R95 respirators
What does R95 mean for particulates?
This model filters at least 95% of oil and non-oil particulate aerosols. Selection depends on contaminants and work conditions.
Does the carbon layer replace a gas/vapour cartridge?
No. It offers nuisance-level ozone and organic vapour relief only. This relief is not a gas/vapour cartridge approval.
How is the mask held on the head?
It has a buckled HandyStrap. Set the fit according to Moldex instructions and check the seal before the task.
Is a beard compatible with the face seal?
The sealing area must remain in contact with skin. A beard crossing that area prevents an adequate fit: have another form of protection selected.
How many masks are sold together?
The box contains 10 Moldex 2840R95 respirators, medium/large size.
Suggestions for this Moldex 2840R95 respirators
For a machine operator wearing this mask after aerosol assessment, plan for indoor/outdoor grey anti-fog SecureFit glasses (YASF407BG) according to lighting. Polyurethane-coated Dexterity gloves (GSSXPU3OF) with three open fingers serve only suitable handling tasks away from machinery. An orange Pioneer women’s shirt (V6968F) accompanies movement. A chinstrap (TA14CS) for a compatible Delta Plus helmet and an orange traffic cone (EPTCONE28B) with reflective bands complete area preparation.
For eye protection, compare foam-padded Proximity (YA169) eyewear and Zenith goggles (YG456), checking fit with the mask. The valveless Moldex respirator (R2200) addresses a different filtration choice. 3M models 8246 (R8246) and 8247 (R8247) allow other respiratory options to be compared according to contaminants, with a separate fit test for each selected model.
R2840
Data sheet
- Product group
- Safety equipment
- Main category
- Personal protection
- Sub category
- Respiratory protection
- Sub sub category
- Disposable masks
- Name of the product
- R95 Disposable respirator
- Series of products
- Moldex respirator
- Product code
- R2840
- Sort by keywords
- Disposable masks
- Product use
- Respiratory protection
- Approved/Certified
- Meets NIOSH R95
- Manufacturer
- Moldex
- Country of origin
- United State of America
- Features
- Nuisance-level ozone and organic vapour relief only
- Comfort features
- Buckled HandyStrap
- Includes
- Ventex valve
- Respirator Style
- Cup-shaped respirator
- Aerosol Type
- Oily and Non-Oily particles
- Respirator size
- Medium/Large size
- Exhalation valve
- Contains an exhalation valve
- Material
- Dura-Mesh shell
- Material2
- Carbon layer
- Length (in/cm)
- Not disclosed by the manufacturer
- Width (in/cm)
- Not disclosed by the manufacturer
- Height (in/cm)
- Not disclosed by the manufacturer
- Weight (lb/kg)
- 1 lb / 0.45 kg
- Sold by
- Box of 10 respirators
- Color
- Not disclosed by the manufacturer
- Return conditions
- No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
You might also like
Comments (0)
No customer reviews for the moment.
8 other products in the same category:
This item is not kept in stock. Please allow 15 days for delivery.
Moldex 2840R95 respirators approved to NIOSH R95, with a Dura-Mesh shell, Ventex valve and buckled HandyStrap. Carbon layer for nuisance-level relief only. Medium/large size, box of 10. Where oil mists are present, do not use for longer than one 8-hour shift and discard no later than 8 hours after first use, or sooner if conditions require. Nuisance-level ozone and organic vapour relief applies only to concentrations below the OSHA permissible exposure limit (PEL); this respirator does not replace a gas/vapour cartridge.