- New
ExoFit X200 Class AP Positioning Harness DBI-SALA 3M
FPH1402012CAP
$516.85
3M DBI-SALA ExoFit X200 Class AP fall arrest and positioning harness. 3 D-rings: 1 dorsal stand-up + 2 lateral hip rings. Double-locking quick-connect leg buckles, pivoting locking chest strap, sub-pelvic strap. CSA Z259.10-18 compliant. Available in Small, Medium, Large and X-Large.
Return conditions:
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
ExoFit X200 Class AP Positioning Harness DBI-SALA 3M
The 3M DBI-SALA ExoFit X200 Class AP harness (fall arrest and positioning) is built for professionals who need to maintain a stable working position at height: general construction, industrial maintenance, manufacturing and transportation. The 2 lateral hip D-rings enable hands-free positioning, while the dorsal ring connects to the fall arrest system. Made in the USA, compliant with CSA Z259.10-18. This harness is vest style, with vertical shoulder straps for easy donning and optimal comfort.
| Size | Sylprotec Code | DBI-SALA Model | 3M Purchase Code |
|---|---|---|---|
| Small | FPH1402010CAP | 1402010C | 7012817737 |
| Medium | FPH1402011CAP | 1402011C | 7012817739 |
| Large | FPH1402012CAP | 1402012C | 7012817741 |
| X-Large | FPH1402013CAP | 1402013C | 7012817743 |
Technical description : D-rings, buckles and components
This harness features 3 zinc-plated steel D-rings: 1 dorsal stand-up D-ring with anti-slip back pad, and 2 lateral hip D-rings for positioning. The patented 3M double-locking quick-connect leg buckles keep the adjustment secure throughout the shift without repeated readjustments. The chest strap buckle is pivoting and lockable (aluminum alloy / zinc-plated steel). The sternal connection is pass-through style (zinc-plated steel). The integrated sub-pelvic strap prevents orthostatic suspension syndrome in the event of a fall.
Plastic end caps prevent fraying. An integrated connector enables quick connection and disconnection of a self-retracting lifeline. The integrated 3M Connected Safety ID (CSID) simplifies inventory management and inspections. Available in: Small, Medium, Large, X-Large.
Load capacity and CSA Z259.10-18 certification
Maximum load: 315 lb (140 kg) including clothing, tools and equipment. Compliant with CSA Z259.10-18 for the Canadian market. This harness is made to order by 3M : allow approximately 1 month for delivery.
Materials : strength, durability and easy inspection
High-strength polyester webbing (6,000 lb / 27 kN): superior resistance to acids, UV and common chemicals. Unpainted hardware: allows direct visual inspection of metal parts without masking corrosion. The quick-connect leg buckles are made of zinc-plated steel, sturdy and cost-effective. Hybrid nylon/polyester padding at legs and back: extended comfort during long days at height.
Application : positioning, construction and industrial maintenance
Ideal for: general construction, industrial maintenance, manufacturing and transportation requiring a stable working position at height. Class AP combines fall arrest (dorsal D-ring) and positioning (hip D-rings) in a single harness. Available in 4 sizes: Small, Medium, Large, X-Large. To be used with a positioning lanyard connecting the hip rings to a lateral or lower anchor point.
Mandatory inspection before each use
Inspect the harness before every use: check for wear, tears, buckle or D-ring deformation, webbing degradation or chemical contamination. A qualified person must perform inspections at regular intervals (90 days recommended). Maximum service life is 5 years for regular use from the date of first use. Remove the harness from service immediately after a fall or impact, even if no visible damage is apparent. Sylprotec offers fall protection equipment inspection services.
Harness care and cleaning
Wash in warm water (37°C / 98.6°F) with mild soap. Never use bleach, solvents or abrasive products. Rinse thoroughly. Air dry away from direct heat and sunlight. Store in a dry location away from UV and contaminants. If the harness is heavily contaminated or has been exposed to aggressive chemicals, replace it.
Frequently asked questions : ExoFit X200 Class AP Harness
What is the difference between Class A and Class AP?
A Class A harness has only one dorsal D-ring : it arrests a fall but does not allow hands-free positioning. A Class AP harness adds two lateral hip D-rings for positioning: the worker can connect these rings to a lateral or lower anchor point to work hands-free with stability.
Can I use this harness for tower or wind turbine climbing?
No : this model is designed for fall arrest and positioning. For tower, wind turbine or pylon climbing, a Class AL harness (with sternal D-ring) or a model certified for that type of work is required. Contact us for the right selection.
Are the leg buckles suitable for extended wear?
Yes : the patented 3M double-locking quick-connect leg buckles hold the adjustment securely throughout the shift without repeated readjustments. Leg and back padding improves comfort during long days in elevated positions.
Complementary suggestions
A structural steel erector wearing this DBI-SALA 3M harness completes personal protection with a high-visibility garment (V486), a helmet (TA80) held by its chinstrap (TA80CS), cut-resistant gloves (GSTACXPNRT), safety eyewear (YA12E93102DX) and corded earplugs (OA101) that stay around the neck and cannot drop from height.
To build a complete fall arrest system around the harness, plan a DBI-SALA 3M fall arrest lanyard (FPL1500156), a DBI-SALA 3M anchor (FPA210314X) suited to the structure, a DBI-SALA 3M retractable (FPLR3503803) lifeline, a 50 ft RollGliss R550 rescue (FPLR5503325) and descent device for emergency lowering, a DANGER barricade tape (ECT3YE7) to cordon off the ground area and the sign (ECO130) reminding that the harness is mandatory.
FPH1402012CAP
Data sheet
- Product group
- Safety equipment
- Main category
- Personal protection
- Sub category
- Fall protection
- Sub sub category
- Fall protection safety harness
- Name of the product
- Safety harness
- Series of products
- ExoFit X200
- Product code
- FPH1402012CAP
- Product use
- For construction work
- Approved/Certified
- Compliant with CSA Z259.10-18
- Manufacturer
- 3M DBI-SALA
- Country of origin
- United State of America
- Choice of format
- Small (S) to extra-large (XL) available
- Reusable
- Reusable with careful inspection and proper installation
- Features
- Patented 3M dual-locking quick-connect buckles. Sternal D-ring for ladder climbing Tongue-buckle thigh straps
- Additional Features
- Integrated SRL adapter and 3M Connected Safety ID (RFID)
- Characteristic adding safety
- Polyester webbing with a 6,000 lb (26.7 kN) strength rating
- Comfort features
- Equipped with a sub-pelvic strap providing greater comfort during suspension
- Characteristics of metal parts
- Unpainted metal parts for easy visual inspection; quick-connect leg buckles made of zinc-plated steel
- Post-suspension relief strap
- Includes trauma straps to allow the fallen worker to stand up while awaiting recovery and avoid losing consciousness
- Includes
- Includes 3 galvanized steel D-rings: 1 dorsal and 2 side rings at the hips for fall arrest and positioning
- Type of retaining straps
- Auto-resetting lanyard keepers
- Property of the material
- Polyester straps offer better resistance to acidic chemicals
- Classification
- Class AP — dorsal D-ring (A, fall arrest) + lateral hip D-rings (P, work positioning)
- Function of attachment points
- Dorsal D-ring: fall arrest. Hip D-rings: work positioning
- Type of harness
- Vest-style harness
- Material1
- Polyester
- Material2
- Aluminum
- Material3
- Aluminum alloy / zinc-plated steel
- Washable
- Wash in warm water, 98.60°F/ 37°C. Never use bleach or other abrasive or chemical products on your lanyard. Air dry
- Length (in/cm)
- 18 in / 46 cm
- Width (in/cm)
- 16.4 in / 41.66 cm
- Height (in/cm)
- 6 in / 15.2 cm
- Weight (lb/kg)
- 5.29 lb / 2.4 kg
- Availability
- Please note: Available only on special order
- Sold by
- Unit
- Color
- Gray/Blue
- Return conditions
- No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
- Caution
- The maximum weight of the worker wearing this harness is 310 lb / 140.6 kg, including clothing, tools, etc
You might also like
Comments (0)
No customer reviews for the moment.
8 other products in the same category:
3M DBI-SALA ExoFit X200 Class AP fall arrest and positioning harness. 3 D-rings: 1 dorsal stand-up + 2 lateral hip rings. Double-locking quick-connect leg buckles, pivoting locking chest strap, sub-pelvic strap. CSA Z259.10-18 compliant. Available in Small, Medium, Large and X-Large.