Placard with UN1760 number (corrosive liquid), 10-3/4 in X 10-3/4 in, for the transportation of dangerous goods

UN1760 placard for corrosive liquids, class 8, 10-3/4 in X 10-3/4 in

This item is not kept in stock. Please allow 5 days for delivery.

The UN1760 placard identifies a load of corrosive liquid, N.O.S., a class 8 substance, on trucks and trailers delivering industrial cleaning products and process chemicals. It shows the number 1760 in black in its white box, the corrosive symbol and the class number 8, on a white and black 10-3/4 X 10-3/4 in diamond that fits most placard holders. Made in Canada, it is sold individually.

Features of the pre-printed UN1760 placard

• UN1760 number pre-printed with the corrosive symbol and the class number 8: no digits to apply yourself.
• 10-3/4 X 10-3/4 in diamond, the standard size that fits most placard holders.
• High-contrast printing, legible from a distance.
• Three materials: low-cost cardboard, reusable rigid plastic or permanent self-adhesive vinyl.
• Designed, according to the manufacturer, for the Canadian TDG Regulations and the IMDG, IATA and ICAO codes: convenient for multimodal transport.

Available formats: cardboard, rigid plastic or self-adhesive vinyl

Aluminum placard available on request: contact customer service for a quote.

Corrosive liquids in transport and storage: what to do in case of a spill

UN number 1760 corresponds to the shipping name CORROSIVE LIQUID, N.O.S., class 8, packing group I, II or III depending on the product. This generic name covers corrosive preparations used in industrial cleaning and chemical processes; it does not specify the acid, the base or the concentration, which are on the safety data sheet. Transport Canada's 2024 Emergency Response Guidebook (ERG) places it under guide 154, for non-combustible toxic or corrosive substances: the liquid can cause severe skin and eye burns, and a corrosive in contact with some metals can release hydrogen, a flammable gas.

In case of a spill during transport or in your storage area, guide 154 calls for dialing 911, then the emergency number on the shipping document, and isolating at least 50 m around a liquid spill, increasing the protected area downwind as needed. Eliminate all ignition sources, do not touch damaged containers or the spilled product without appropriate protective clothing and, if you can do it without risk, stop the leak. Keep the corrosive liquid out of waterways, sewers, basements and confined areas. Absorb or cover the liquid with dry earth, sand or another non-combustible material, transfer it into containers and keep water out of the containers.

Keep a mineral absorbent (ABGMM225) in the vehicle and near the storage area to cover the liquid, along with chemical socks (ABCB30) and pads (ABCT100) to contain the flow; check their compatibility with the product's safety data sheet.

Fire safety for corrosive liquids: which extinguisher to keep in the vehicle and at the warehouse

The substance itself does not burn, but heat can break it down into corrosive or toxic gases. In a fire, it is often the vehicle, the packaging or nearby goods that burn, and heat can rupture containers and release corrosive or toxic gases. For both small and large fires, guide 154 names dry chemical and CO₂ among the agents: an ABC dry chemical (EXABC10) extinguisher or a CO₂ (EXCO10) unit is suitable. Place it in the vehicle cab and at an accessible spot near the storage area, outside the hazard zone. A fire that spreads is a job for firefighters; if a tank is involved, the guide calls for isolating 800 m in all directions and considering an initial evacuation over the same distance.

These guidelines from the 2024 ERG help you prepare your transport and storage procedures. For the exact product and the real situation, the current safety data sheet and the ERG prevail; emergency measures are for trained and equipped personnel, with a positive pressure self-contained breathing apparatus (SCBA), as the guide specifies.

UN1760 placard applications

The UN1760 placard is intended for chemical distributors, industrial cleaning product manufacturers and dangerous goods carriers shipping corrosives without a more specific shipping name. Cardboard is handy for a one-time load, rigid plastic is reused from one trip to the next, and self-adhesive vinyl stays in place on a tank dedicated to corrosives.

Complete your display with an aluminum flip chart placard, with five (ECLAP5) legends including class 8, or fourteen (ECLAP14) legends, for trucks whose cargo changes; the class 8 corrosive placard (ECLA8); and the yellow and black warning tape (ECT751JN108) for surface marking to identify the storage area.

UN1760 placard technical specifications

Placard installation and care

Apply the self-adhesive vinyl to a clean, dry surface. Keep the placard clean so the number stays legible, and replace it if it is damaged, faded or illegible. For a placard exposed to the weather for a long time, choose rigid plastic or vinyl over cardboard.

FAQ: UN1760 placard and corrosive liquids transport

Which material should I choose for the UN1760 placard: cardboard, plastic or vinyl?

Cardboard is the low-cost option for temporary use. Rigid plastic is weatherproof and reusable. Self-adhesive vinyl suits permanent application on a tank or trailer.

What should I do in case of skin or eye contact?

For corrosives, guide 154 calls for immediately rinsing the skin or eyes with running water for at least 30 minutes; longer rinsing may be needed. Then get medical attention.

What safety perimeter is needed for a spill of the corrosive liquid?

Guide 154 of the 2024 ERG calls for isolating at least 50 m around a liquid spill and increasing the protected area downwind as needed. If a tank is on fire, isolate 800 m in all directions.

Which extinguisher should I keep in a vehicle carrying the corrosive liquid?

An ABC or BC dry chemical extinguisher, or a CO₂ extinguisher: guide 154 names them for both small and large fires. A fire that spreads is a job for firefighters.

Does the UN1760 placard fit in a placard holder?

Yes. Its 10-3/4 X 10-3/4 in format is the standard size that fits most placard holders.

Suggestions for transport and storage of corrosive liquids

For the driver or handler who deals with the corrosive liquid at loading, delivery or in the warehouse, plan for Centurion splash goggles (YG454), a 6000 series full face respirator (R6800) with combination organic vapour and acid gas cartridges (R60923), selected according to the SDS and the risk assessment, 12 in Chemstop neoprene gloves (GNE3030), waterproof PVC steel toe boots (VC18821C) and a flame-resistant high-visibility vest (VV510FR) to stay visible on the road and at the loading station.

To contain and respond to a spill, keep on hand pads (ABCT100) for corrosive or hazardous chemicals, socks (ABCB30) for these chemicals, a large 55 US gallon hazmat spill kit (ABCE55), Magic Monkey mineral absorbent (ABGMM225), a 10 lb ABC dry chemical (EXABC10) extinguisher, a 10 lb CO₂ (EXCO10) extinguisher and 28 in traffic cones (EPTCONE28B) to mark off the perimeter. Kit selection depends on the work situation and CNESST criteria; not every truck driver is automatically an isolated worker: the type 1 personal (TR01) first aid kit suits an isolated worker with no access to another kit, a vehicle with 1 to 5 workers, or a vehicle with more than 5 workers less than 30 minutes from medical services; for a vehicle with more than 5 workers more than 30 minutes from medical services, provide the type 2 basic (TR02M) first aid kit. Complete the truck's equipment with a portable road safety kit (TR16) and the set of three removable reflectors (EPTR) to signal a stopped vehicle.

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.