- New
The 3M Speedglas 06-0700-83 flame-resistant full hood attaches to the welding helmet and protects the top of the head, the neck and the shoulders against sparks and welding spatter. 3M specifies it for the 9100, 9100 FX, 9100 FX-Air, G5-01, G5-02 and 9100 MP helmets, so a crew can use the same hood on several series. On a G5-01, the flame-resistant head cover (R46-0700-80) and the rigid neck protector are ordered separately. Sold individually, in black.
Delivery time: 7 business days.
3M manufacturer code: 7000128087, model 06-0700-83
The 3M Speedglas 06-0700-83 full hood attaches to the welding helmet and covers the top of the head, the neck and the shoulders, where sparks and welding spatter fall in position welding or when the welder is bent over the workpiece. The G5-01 instructions designate it as a flame-resistant full hood, in black fabric. 3M specifies it for the 9100 series, 9100 FX, 9100 FX-Air, G5-01 and G5-02 helmets and for the 9100 MP, and the G5-03 E instructions list it among its accessories. Sold individually, it completes the helmet without changing its adjustment or optical protection.
The helmet protects the face, but sparks fall on the top of the head, the nape and the shoulders, especially in position welding or when bent over the workpiece. The 06-0700-83 hood covers these three areas in a single piece, in flame-resistant fabric according to the G5-01 instructions.
It differs from the G5-01 fabric head cover (R46-0700-80), which mainly protects the top of the head, and from the G5-01 APF 1000 kit, reserved for G5-01 respiratory configurations. The same hood serves several Speedglas series, which simplifies a crew's reserve.
3M specifies the hood for 9100 series, 9100 FX, 9100 FX-Air, G5-01 and G5-02 helmets, as well as the 9100 MP; the G5-03 E helmet user instructions also list it among its accessories. On a G5-01 used with a respirator, the instructions specify that only the G5-01 large head cover and large neck shroud give the protection factor of 1000; the APF 1000 kit (R46-1000-00) groups them. The 06-0700-83 hood is not presented as part of that configuration.
The hood is used in construction, heavy infrastructure projects and industrial maintenance, wherever spatter reaches the head, the nape or the shoulders: position welding, work bent over the workpiece. 3M also recommends it for grinding, assembly, machine operation, sanding and facility maintenance, with a helmet suited to the task: 3M states that the G5-02 is not suitable for grinding. It suits crews that use several Speedglas models, since the same hood fits several series.
One Speedglas flame-resistant full hood, in black fabric, sold individually. Not included: the welding helmet, the filter and any respirator.
Attach the hood to the helmet shell with its fasteners and let it drop over the nape and shoulders. Then raise and lower the helmet to check that it does not hinder the tilt. Before each use, check that the fabric shows no burn, hole or fraying and that the fasteners hold.
The hood protects against sparks and spatter; it replaces neither the welding helmet nor complete protective clothing. It does not filter air and provides no respiratory protection. Burned, holed or frayed fabric lets sparks through: stop using it. The G5-01, G5-02 and G5-03 E helmet user instructions warn that heavy-duty overhead welding, where molten metal may fall, can cause severe burns; the hood does not lift this helmet restriction.
Check the hood regularly: burned, holed or frayed fabric lets sparks through and must be replaced. Make sure the fasteners hold the hood firmly to the helmet before welding. 3M reminds users to check equipment often and replace any worn or damaged part.
The top of the head, the neck and the shoulders, against sparks and welding spatter.
3M specifies it for Speedglas 9100 series, 9100 FX, 9100 FX-Air, G5-01 and G5-02 helmets, as well as the 9100 MP. The G5-03 E user instructions also list it among its accessories.
No. The hood is sold alone; the welding helmet is ordered separately.
No. It is a flame-resistant textile protection against sparks. It does not filter air and does not, on its own, increase the respiratory protection of a helmet.
As soon as the fabric is burned, holed or frayed, or the fasteners no longer hold it to the helmet. Inspect it before each use.
For related tasks, foam-equipped Virtua (YA11872) Max and clear-lens SecureFit (YASF201) SF201 eyewear provide two eye-protection options. Uncorded 3M 1100 earplugs (O1100) address hearing protection according to the assessed noise exposure. For hands and forearms, complement your clothing with 11 in welding gloves (G605) and 18 in flame-resistant Proban sleeves (VS23).
If you use the hood with a G5-01, the flame-resistant fabric head cover (R46-0700-80) and rigid neck protector (R46-0700-65) are other accessories for that model. The sweatband (R46-0200-54), supplied in a pack of three, replaces the part in contact with the forehead.
Data sheet
Specific References
You might also like