compare_arrows
Bradley wall-mounted Halo eye wash with stainless steel bowl and dust cover, tailpiece and P-trap, certified ANSI Z358.1-2009.
search
  • Bradley wall-mounted Halo eye wash with stainless steel bowl and dust cover, tailpiece and P-trap, certified ANSI Z358.1-2009.
Bradley

Bradley wall-mounted Halo eye wash with stainless steel bowl and dust cover, tailpiece and P-trap, certified ANSI Z358.1-2009.

PD19224DCPT
$932.45
Quantity

Compare
Return conditions:

No returnable if used. For more information about our return policy, please refer to the Orders and Returns.

Bradley wall-mounted Halo eye wash station (S19224DCPT) with a stainless steel bowl, a hinged dust cover, a tailpipe and a P-trap.

Certified ANSI Z358.1-2009. Minimum flow exceeds 0.4 gpm (1.5 L/min). It does not include a device for controlling water temperature.

Ideal for laboratories, medical facilities, industries, workshops, and any other places where workers risk being exposed to dust, particulates or dangerous materials.

This eye wash station is wall-mounted and keeps the floor area cleared. Its single-step activation simply requires a push on the large handle, leaving a user’s hands free once turned on. The hinged dust cover tilts open at the same time as the handle moves. This eye wash station is also barrier-free, for use by people in wheelchairs.

The eye wash station has separate pipes for water intake and drain, and ensures a safe, steady flow of water, even if the water supply pressure varies between 30 and 90 PSI. The bowl and dust cover are made of heavy-duty stainless steel. The spray heads are equipped with strainers to filter water particulates, and with antimicrobial protection. Pipes are made of stainless steel.

The kit included:

  • Parts necessary for the installation of the eye wash station and the connection to a water supply (some parts are not supplied, see instructions)
  • 1 universal safety sign to indicate the location of the emergency eyewash station
  • 1 inspection tag
  • 1 trilingual instruction booklet (English, French, Spanish). PDF version is also available, see below.

The manufacturer recommends the installation of a thermostatic valve in order to comply with ANSI Z358.1-2009 standards. A thermostatic valve keeps rinsing water at a lukewarm temperature.  Rinsing water should not be too cold (for more comfort while rinsing for the minimum required rinsing time of 15 minutes) nor too hot (to avoid aggravating eye or face injuries and to avoid scalding).

Discover the Halo wall-mounted eyewash by Bradley, an essential solution for ensuring safety in your workplace.

Designed with a stainless steel bowl and dust cover, this eyewash station provides reliable and durable protection. Approved by ANSI Z358.1-2009, it guarantees optimal performance in case of emergencies.

Equip your workspace with the Halo eyewash and provide your staff with the peace of mind they deserve.

Peculiarities of:
The Halo eyewash is known for its robustness and durability. Its ergonomic design ensures effective eye rinsing in emergencies. The stainless steel bowl provides optimal protection against corrosion and makes maintenance a breeze. Designed for demanding industrial environments, it is a trusted choice for workplace safety.

Application:
To use the Halo eyewash, open the water valve and direct the stream towards your eyes while keeping your eyelids open. Rinse your eyes thoroughly for at least 15 minutes to remove any irritating substances.

Maintenance and service life: 
To maintain the Halo eyewash in good condition, it is important to clean it regularly with suitable products to prevent corrosion. Ensure that the moving parts function properly and periodically check the tightness of the fittings. It is also essential to test the eyewash regularly to ensure it operates perfectly in case of an emergency.

Suggestions:
Do you need additional safety equipment? Check out the following items: CDN Eye Wash Poster (ECU505-812), rigid plastic eye patches, 7.5 X 1.25 X 3.8 cm (PS511), sterile eye pads, 4.1 X 6.6 cm (PS514), Cederroth emergency eye wash solution (PD505-235), wall-mounted eye wash kit, 1 liter (PD520), wall mount for Cederroth eye wash solution (PD505S).

Under “Accessories” at the bottom of the page. If you're looking for work equipment, see the following products: Earplugs (OA101) and 3M N95 respirators (R8210).

Texts colored green correspond to hyperlinks leading to specific safety equipment or general information.

PD19224DCPT

Data sheet

Product group
Safety equipment
Main category
First aid and emergency showers
Sub category
Emergency showers
Sub sub category
Eyewash & face wash stations
Name of the product
Eye wash
Product code
PD19224DCPT
Sort by keywords
Steel dust shower
ANSI Requirements
Compliance ANSI Z358.1-2009
Manufacturer
Bradley
Features
This device does not include a thermostatic valve, therefore there is no automated water temperature control
Additional Features
The heads are equipped with filters to retain water particles and antimicrobial protection
Includes
Parts necessary for the installation of the eyewash station and the connection to a water supply (some parts are not supplied, see instructions)
Type of emergency
Eye wash
Installation specifications
This eyewash can be installed on a wall, without cluttering the floor
Activation type
Push on the large handle, leaving a user’s hands free once turned on. The hinged dust cover tilts open at the same time as the handle moves. This eye wash station is also barrier-free, for use by people in wheelchairs.
Operating flow rate
Minimum flow exceeds 0.4 GPM (1.5 L/min) at 30 PSI
Material1
The bowl and the cover are made of stainless steel, strong and resistant. The piping is made of stainless steel
Length (in/cm)
24 in / 60.9 cm
Width (in/cm)
24 in / 60.9 cm
Height (in/cm)
24 in / 60.96 cm
Weight (lb/kg)
10 lb / 4.5 Kg
Sold by
Unit
Return conditions
No returnable
New

You might also like