- On sale!

No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
Retaining block for round tools ranging from ½" to 1-1/4" (13 mm to 32mm) in diameter. Two products are available to suit different diameters, please make your selection from the drop down menu above. These clamps must be paired with the retaining cords to function. Cords are sold separately. See products FPLA9900, FPLA9901, FPLA9902, FPLA9903.
Peakworks manufacturer's code for the different diameters :
Product: V8561701, model: TT-7000-1 for 1/2" to 3/4" (13 to 19 mm) diameter round tools
Product: V8561801, model: TT-8000-1 for 1/1/16" to 1-1/4" (27 to 32 mm) diameter round tools.
Discontinued product, final sale.
Product available while supplies last.
Customers who order more than we have in stock will be reimbursed for any shortfall.
Reference |
Size |
In stock |
FPLAB1319 |
1/2 to 3/4 in, 13 mm to 19 mm |
5 |
FPLAB2732 |
1-1/16 to 1/1/4 po / 27 to 32 mm |
5 |
Maintenance:
For cleaning, use mild soap and clean warm water (37°C). Do not use bleach or other abrasive or chemical products. If your clamp is too dirty or contaminated, it is time to replace it. Air dry without excessive heat in a clean environment. You can help by wiping with a very clean absorbent cloth or by using a fan. Avoid exposing the sling to sunlight or any source of contamination.
Suggestion:
To complete your fall protection you will find a range of lanyards, self-retracting lanyards and anchors. Some products are suggested under the "accessories" tab at the bottom of this page.
Other equipment frequently used with this safety equipment:
Peakworks FPBAG storage bag
The FPH4000AP safety harness
Tool strap to be attached to the wrist 18 in (45.7 cm) long, 15 lb max, FPLA9900
Harness-mounted tool strap 32" (81 cm) long, 30 lb max, FPLA9901
Harness-mounted tool sling, lightweight tools under 15 lb, 28 in. long, FPLA9902
Peakworks wrist tool strap with carabiners, FPLA9903
Data sheet
Specific References
You might also like