Peakworks harness tool attachment strap with locking carabiners
FPLA9903
$48.90
Peakworks slim tool attachment strap that attaches to the harness, in hi-vis green polyester, with two self-locking safety carabiners. Length 28 in (71 cm) x 5/8 in wide, 15 lb (6.82 kg) capacity. Must be paired with a retaining clamp (sold separately).
Return conditions:
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
Peakworks tool attachment strap slim for harness, 28 in
This Peakworks tool attachment strap is part of a dropped-object prevention system: it tethers a tool to your harness to keep it from falling and injuring a worker below. Fitted with self-locking carabiners for added safety. Made of hi-vis green polyester, it is fitted with two self-locking carabiners.
Important: to work, these tethers must be paired with retaining clamps, sold separately (see products FPLA, FPLAP and FPLAB). The clamp attaches to the tool, the strap provides the drop-prevention link.
Dimensions: length 28 in (71 cm) by 5/8 in (1.59 cm) wide. Maximum capacity: 15 lb (6.82 kg). Peakworks product code (see listing). This strap is not personal fall-arrest equipment: it protects against dropped objects, not against a worker's fall.
Benefits of the tool drop-prevention strap
Dropped tools are a frequent cause of accidents on jobs at height. Securing each tool with a strap protects workers below and prevents loss of equipment.
Safety and productivity at height
Lightweight and high-visibility, the strap keeps the tool within reach while preventing its fall. Paired with the right clamp, it fits most hand tools.
Where this product is useful
Essential for any work at height: construction, building maintenance, industry, telecommunications, bridges and structures, where a dropped tool is a hazard.
Tool strap maintenance
Inspect the strap, stitching and carabiners before each use; replace at the first sign of wear, cut or malfunction. Clean with lukewarm water and mild soap, without solvents, and air dry. Any strap that has arrested a dropped object must be inspected before reuse.
FAQ about the tool attachment strap
Does this strap work on its own?
No. It must be paired with a retaining clamp (FPLA, FPLAP or FPLAB), sold separately, that attaches to the tool.
What load does it support?
Its maximum capacity is 15 lb (6.82 kg). Never exceed this limit.
Does it protect against a person's fall?
No: it is a dropped-object prevention system. Worker protection is provided by a fall-arrest harness and lanyard.
Suggestions and required retaining clamps
To work, this strap must be paired with a retaining clamp sold separately. See also a clamp for round tools (FPLA), a clamp for flat tools (FPLAP), a retaining block (FPLAB), another tool strap (linked ref), a strap version (linked ref), a strap model (linked ref), a Peakworks harness (FPH1000A) and a storage bag (FPBAG). Under "Accessories" at the bottom of the page.
FPLA9903
Data sheet
- Product group
- Safety equipment
- Main category
- Personal protection
- Sub category
- Fall protection
- Sub sub category
- Fall protection safety harness
- Name of the product
- Tool attachment strap
- Product code
- FPLA9903
- Approved/Certified
- None
- Manufacturer
- Peakworks
- Country of origin
- China
- Format
- Length 28" / 71 cm by 5/8" / 1.59 cm wide
- Reusable
- Reusable with careful inspection and proper installation
- Features
- Harness tool strap with carabiners for lightweight tools
- Characteristic adding safety
- Features two self-locking carabiners that swivel at each end for added security
- Includes
- With two carabiners
- Property of the material
- Polyester straps offer better resistance to acidic chemicals
- Load capacity
- Maximum capacity of 15 lb / 6.82 Kg
- Material1
- Polyester
- Material2
- Steel
- Washable
- Wash in warm water, 98.60°F/ 37°C. Never use bleach or other abrasive or chemical products on your lanyard. Air dry
- Length (in/cm)
- 6 in / 15.24 cm
- Width (in/cm)
- 3 in / 7.6 cm
- Height (in/cm)
- 2 in / 5.08 cm
- Weight (lb/kg)
- 2 lb / 0.9 Kg
- Sold by
- Unit
- Color
- High Visibility Green
- Return conditions
- No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
- Caution
- These cords must be paired with retaining clamps to operate, see FPLA, FPLAP, FPLAB products
New
You might also like
Comments (0)
No customer reviews for the moment.
8 other products in the same category:
Peakworks slim tool attachment strap that attaches to the harness, in hi-vis green polyester, with two self-locking safety carabiners. Length 28 in (71 cm) x 5/8 in wide, 15 lb (6.82 kg) capacity. Must be paired with a retaining clamp (sold separately).