- New
The 3M Speedglas 07-0024-02 fleece sweatband fits at the front of the headband, absorbs sweat and gives soft support on the forehead during welding. 3M specifies it for 100 series, 9002NC and G5-02 helmets, including the 08-0400-51 G5-02 headgear assembly. It is usually changed once a month, or sooner if it is no longer hygienic. Sold in a bag of 2 units, to keep a clean sweatband in reserve at the station.
Delivery time: 30 business days.
3M manufacturer code: 7000127453, model 07-0024-02
The 3M Speedglas 07-0024-02 sweatband is the fleece band that fits at the front of the headband and absorbs sweat from the forehead during welding. It provides a soft interface between the skin and the suspension, and keeps perspiration away from the eyes and the filter. 3M specifies it for Speedglas 100 series, 9002NC and G5-02 welding helmets. It is usually changed once a month, or sooner if it is no longer hygienic; the bag of 2 units gives a spare sweatband ready to fit.
Sweat running from the forehead hinders vision and makes the headband contact uncomfortable during long welding sessions. The 07-0024-02 fleece sweatband absorbs this perspiration and softens the contact between the skin and the suspension.
The bag of 2 units gives one sweatband in use and one spare ready to fit, to follow the replacement schedule advised by 3M without waiting for an order.
3M specifies this sweatband for Speedglas 100 series, 9002NC and G5-02 helmets; on the G5-02, it fits on the 08-0400-51 headgear. The 3M user instructions for the G5-03 E welding helmet also list it among the spare parts of its headband. For the G5-01, the 3M user instructions list the 46-0200-54 G5 sweatband (R46-0200-54), sold in a bag of 3 on another product page.
This sweatband accompanies welders who wear a Speedglas 100, 9002NC or G5-02 for long hours, in construction, heavy infrastructure projects and industrial maintenance. It serves during welding, grinding, assembly, sanding, machine operation and facility maintenance, especially in hot shops where sweat runs down the forehead. On the G5-02, 3M states that the helmet is not suitable for grinding.
Bag of 2 black fleece sweatbands. Not included: the headband and the welding helmet.
Remove the worn sweatband from the front of the headband and fit the new one in its place, centred on the forehead. Then tighten the headband and check that the sweatband stays in place when you raise and lower the helmet.
The sweatband is a comfort and hygiene part: it replaces no part of the suspension and provides no protection. A sweatband that is worn, damaged or no longer meets hygiene standards must be replaced, without waiting for the monthly interval.
Replace the sweatband about once a month, or more often as soon as it is worn, damaged or no longer meets hygiene standards. Check the headband regularly at the same time: 3M recommends replacing any worn or damaged part. Keep the spare sweatband in its bag, away from grinding dust.
3M specifies it for Speedglas 100 series, 9002NC and G5-02 welding helmets, and the G5-03 E helmet user instructions list it among its spare parts.
Two fleece sweatbands per bag.
No. The bag contains only the two sweatbands; on the G5-02, the 08-0400-51 headgear assembly is ordered separately.
3M indicates replacement usually once a month, or more often if the sweatband is worn, damaged or no longer meets hygiene standards.
Before each use, check that the fleece is clean, odour-free and not worn, and that it stays centred at the front of the headband. Replace it as soon as it is no longer hygienic or shifts.
In a hot shop, the clear Zenith safety glasses (YAZ200) fit over prescription glasses under the helmet; clear anti-fog Genesis (YAU3200) or clear anti-fog SecureFit (YASF401BG) 400 series glasses suit other welders. The Endura goatskin and Kevlar gloves (G625) suit MIG and TIG work, and the 23 in Weld-Mate sleeves (VS27) protect the forearms.
Between jobs, the Speedglas bag (R06-0500-65) provides storage for the helmet. At the workstation, the orange welding screen (AGP02) helps define the work area, while lens wipes (Y51) help maintain safety eyewear.
Data sheet
Specific References
You might also like