FPAM88

North semi-automatic auto-locking D-shaped carabiner with a 1 in (25.4 mm) throat opening. Made for fall protection equipment.

$25.35

Return conditions : No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page.

Semi-automatic carabiner requiring a double action to unlock. This North steel offset D-shaped snap hook with a 1 in (25.4 mm) throat opening is made for the anchorage of fall protection equipment.

This product meets the standards ANSI A10.32, ANSI Z359.1-2007 and OSHA 1926.502, 1910.66. This type of carabiner can support a force of 5000 lbs (22 kN).

The worker is responsible for visually inspecting the carabiner(s) before each use. During this routine inspection, the worker must note any signs of degradation, malfunction, or breakage. The carabiner will have to be replaced if any such signs are detected.

On top of this routine inspection, the carabiner must be inspected by a qualified person different than the worker. The frequency of these inspections varies according to the manufacturer. Some manufacturers require an inspection every 90 days, others every 180 days, or even yearly. These inspections should be performed more often if the carabiner is used in extreme environmental working conditions.

Sylprotec offers a fall protection equipment inspection service. Find out more by clicking on the Services tab, under the Sylprotec logo at the top of the page.

Any equipment that has withstood a fall or an impact must be scrapped.

For cleaning, use a gentle soap or detergent and lukewarm water (37°C). Do not use bleach, chlorine, or other abrasive or chemical products. Air dry without using heat in a clean environment. You may lubricate the door mechanism with powdered graphite when needed.

Type of product Safety equipment
Main category Personal protection
Sub category Fall protection
Sub sub category Anchorage & connectors
Name of the product Self-locking semi-automatic carabiner
Series of products North Zone™
Product code FPAM88
Approved/Certified ANSI A10.32, ANSI Z359.1-2007 et OSHA 1926.502, 1910.66
Manufacturer Honeywell
Features 1 in. opening
Additional Features Requires a double action to unlock and locks automatically
Form Asymmetrical «D»
Comfort features Capable of withstanding a force of 5000 lbs (22 kN) without deforming
Material Steel
Washable Wash in warm water, 98.60°F/ 37°C. Never use bleach or other abrasive or chemical products on your harness. Air dry
Height (in/cm) 0.5 in / 1.27 cm
Length (in/cm) 5 in / 12.7 cm
Width (in/cm) 3.5 in / 8.89 cm
Weight (lb/kg) 0.6 lb / 0.27 Kg
Sold by Unit
Return conditions No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page.

Reviews

No customer reviews for the moment.

Write a review
North semi-automatic auto-locking D-shaped carabiner with a 1 in (25.4 mm) throat opening. Made for fall protection equipment.

North semi-automatic auto-locking D-shaped carabiner with a 1 in (25.4 mm) throat opening. Made for fall protection equipment.

Accessories

18 other products in the same category: