Clamp for flat tools ranging from 5/16" to 1-5/16" (8 mm to 33 mm) in width from Peakworks

More info
Data sheet
Download

Clamp for flat tools ranging from 5/16" to 1 5/16" (8 mm to 33 mm) in width. Two products are available to suit different widths, please make your selection from the drop down menu above. These clamps must be paired with the retaining cords to function. Cords are sold separately. See products FPLA9900, FPLA9901, FPLA9902, FPLA9903.

Peakworks manufacturer's code for the different diameters :

Product: V8561501, model: TT-5000-1 for flat tools 5/16" to 15/16" (8 to 24 mm) wide
Product: V8561601, model: TT-6000-1 for flat tools 9/16" to 1-5/16" (14 to 33 mm) wide flat tools.

Discontinued product, final sale.

Product available while supplies last.

Customers who order more than we have in stock will be reimbursed for any shortfall.

Reference	Size	In stock
FPLAP1433	1/2 to 3/4 in, 13 mm to 19 mm	5
FPLAP824	8 mm à 24 mm	1

- Tested to CSA standards under extreme conditions
- Suitable for different size tools, especially flat tools
- High density polyethylene (HDPE) plastic
- Contains a hex key and instructions

Maintenance:

For cleaning, use mild soap and clean warm water (37°C). Do not use bleach or other abrasive or chemical products. If your clamp is too dirty or contaminated, it is time to replace it. Air dry without excessive heat in a clean environment. You can help by wiping with a very clean absorbent cloth or by using a fan. Avoid exposing the sling to sunlight or any source of contamination.

Suggestion:

To complete your fall protection you will find a range of lanyards, self-retracting lanyards and anchors. Some products are suggested under the "accessories" tab at the bottom of this page.

Other equipment frequently used with this safety equipment:

Peakworks FPBAG storage bag
The FPH4000AP safety harness
Tool strap to be attached to the wrist 18 in (45.7 cm) long, 15 lb max, FPLA9900
Harness-mounted tool strap 32" (81 cm) long, 30 lb max, FPLA9901
Harness-mounted tool sling, lightweight tools under 15 lb, 28 in. long, FPLA9902
Peakworks wrist tool strap with carabiners, FPLA9903

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.

Type of product	Safety equipment
Main category	Personal protection
Sub category	Fall protection
Sub sub category	Fall protection safety harness
Name of the product	Clamp for flat tools
Product code	FPLAP
Approved/Certified	None
Manufacturer	Peakworks
Country of origin	China
Choice of format	Available in 2 sizes, FPLAP824: for flat tools from 5/16" to 15/16" / 8 mm to 24 mm, FPLAP1433: for flat tools from 9/16" to 1-5/16" / 14 mm to 33 mm
Reusable	Reusable with careful inspection and proper installation
Features	Clamp for flat tools with widths ranging from 5/16" to 1-5/16" / 8 mm to 33 mm
Additional Features	Two separate products are available to fit different diameters. They are sold separately
Includes	Contains a hex key and instructions for use
Material1	High density polyethylene (HDPE)
Material2	Steel
Washable	Wash with soap and water if necessary
Length (in/cm)	6 in / 15.24 cm
Width (in/cm)	3 in / 7.6 cm
Height (in/cm)	2 in / 5.08 cm
Weight (lb/kg)	2 lb / 0.9 Kg
Sold by	Unit
Color	High Visibility Green
Return conditions	No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
Caution	These clamps must be paired with the retaining cords, see products FPLA9900, FPLA9901, FPLA9902, FPLA9903