Nitrile unsupported textured & flock-lined safety glove for chemical protection. 13 in long and 11 mils thick.

$2.25

Please select the available option below :

Return conditions : No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

Green nitrile unsupported, flock-lined glove of a thickness of 11 mils and a total length of 13 in (31 cm). This glove features an embossed pattern on the palm of the hand and long cuffs for a chemical protection. Sold by the pack. 12 pairs/pack.

These gloves are available in sizes ranging from small (7) to extra-large (10). Please select the size needed in the field located above.

This glove is also approved for food handling by the Canadian Food Inspection Agency (CFIA) and Agriculture and Agri-Food Canada (AAC).

GL9315 pecularities:
This model of glove has been flock-lined, that is, it has undergone a process of depositing many small fiber particles – here cotton - onto its inner part. The thin layer of cotton – about 2 mils – eases the donning and duffing of the gloves. In order for the glove to retain a certain grip quality without adhering to object while handling them, most of the palmar surface of the glove has an embossed pattern to offer a good grip on wet or dry objects.

Nitrile properties:
Nitrile is the best alternative to latex since it offers an excellent flexibility, a secure fit and unequalled toughness and comfort. Nitrile is in fact an elastomer synthetized by copolymerizing butadiene with acrylonitrile. This material is quite resistant to domestic products such as ammonia, fertilizers, pesticides, herbicides, paints, solvents, oils, greasy substances and hydrocarbons.

We recommend wearing cotton liners under these gloves to help absorb the moisture generated by perspiration (G217 and G218).

Use for:
This glove is recommended for work requiring the use of chemical products, acids, caustics, greasy substances. It may also be used in chemical plants, agri-food and food processing industries, maintenance, car industry, etc. These gloves must be kept a room temperature ranging from -4°C and 149°C (25°F and 300°F).

Do not use for:
Nitrile lays down no special restrictions, since it has been designed to address mechanical, chemical and biological risks. It is just a matter of knowing which thickness is suitable for your type of application. The more the glove is thick, the more it offers mechanical and chemical resistance.

Maintenance and service life:
This glove may be reused, but we strongly recommend doing a periodic maintenance to avoid any contamination. To wash your gloves, wear them as if you were working and wash your hands with soap as you do normally. If need be, use bleach to remove stains or more tenacious agents. Please note that to ensure the quality of your product after wash, you must turn your gloves inside out to dry them completely.

Type of productSafety equipment
Main categoryPersonal protection
Sub categoryGloves
Sub sub categoryReusable gloves nitrile, rubber, latex, neoprene or PVC
Name of the productNitril glove
Product codeGL9315
Approved for food useCFIA ( Canadian food inspection agency)
Thickness in mils11 mils
Palmar surface of the handTextured
Choice of formatSmall (7) to extra large (10) sizes available
MaterialNitrile
Length (in/cm)14 in / 35.56 cm
Width (in/cm)3 in / 7.6 cm
Height (in/cm)0.05 in / 0.127 cm
Weight (lb/kg)0.05 lb / 0.022 Kg
Sold by1 Pack (12 pairs)
ColorGreen
Return conditionsNo returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

gants resistance chimique table

gants resistance chimique tableau_FR_2013_en

Download (160.87k)

Accessories

27 other products in the same category: