Piranha NexStripPro maximum strength paste paint stripper ideal for renovations & lead-based paint stripping, 20L/5 gal(US)

Lead paint remover for indoor and outdoor use: maximum efficiency for your renovation projects

Manufacturer code: Fiberlock Technologies 5701 Need a powerful, safe, and easy-to-use remover to strip layers of lead-based paint or other stubborn coatings? The Piranha NexStrip Pro paste remover 20 L is the ideal solution for renovation professionals. Thanks to its dual-action formula, it works quickly and deeply, and is suitable for both indoor and outdoor surfaces.

Thanks to its paste-like consistency, this remover is easy to apply using a brush, trowel, or airless sprayer, and it stays in place. On lightly painted surfaces, it works in as little as 2 hours. For other painted surfaces, 8 to 12 hours should be sufficient. For surfaces with multiple layers of paint, allow 24 to 72 hours for full dwell time. If the dwell time exceeds 6 hours, the manufacturer recommends covering the remover to prevent premature drying.

If this remover is used to strip lead-based paint, necessary precautions must be taken to avoid creating dust or residues that may contain lead. These residues pose a serious health risk due to their small size, which makes them easy to inhale or ingest accidentally. Residues must be cleaned using a damp mop or a HEPA vacuum. During lead decontamination, personal protective equipment must always be worn.

This remover contains benzyl alcohol, an irritant to eyes and skin. Use a full-face or half-face respirator with organic vapor cartridges, sealed goggles, nitrile gloves, and appropriate clothing. Ensure proper ventilation during use. Remove paint residues with a trowel or nylon brush and place them in a plastic container. At the end of the work, wash treated surfaces with soap and water.

Paste remover:

This water-based chemical remover is biodegradable, non-flammable, and low odor. It works in two stages: first, it dissolves the paint in direct contact with the remover, then penetrates deeper to lift all underlying layers. It allows for complete cleaning of painted surfaces. It is effective against latex, epoxy, elastomeric, alkyd, urethane, and lead-based paints, both indoors and outdoors, and on many surfaces such as concrete, brick, aluminum, wood, fiberglass, plastic, and more.

• Dilution: this product must be used undiluted
• Coverage: between 40 and 46 sq. ft./US gal

Product features of Piranha NexStrip Pro remover:

The Piranha NexStrip Pro paste remover is a water-based, biodegradable, non-flammable, and low-odor product. It is designed to effectively remove lead-based paint, latex, epoxy, urethane, alkyd, elastomeric, and other resistant coatings. Its dual-action formula starts by dissolving the surface layer, then penetrates to lift the underlying layers.

This paint remover is compatible with many surfaces: concrete, brick, wood, aluminum, plastic, fiberglass, etc. It is sold in a 20 L (5 US gal) format and offers coverage of 40 to 46 sq. ft. per gallon, depending on application thickness.

How to apply the lead paint remover:

Piranha NexStrip Pro should be used undiluted. Apply it using a brush, trowel, or airless sprayer. For optimal results, apply a layer between 1/16 and 1/4 inch thick. On lightly painted surfaces, it works in 2 hours. For surfaces with multiple layers, allow 8 to 72 hours.

If dwell time exceeds 6 hours, it is recommended to cover the product to prevent drying. Avoid direct sunlight and work at temperatures between 15 °C and 32 °C for best results.

How to maintain the product after use:

After use, clean tools and equipment with soapy water or denatured alcohol. Reseal the container tightly to prevent evaporation. Store the paste remover in a cool place, away from freezing and excessive heat. Do not reuse contaminated product.

Usage tips for safe paint removal:

When removing lead-based paint, wear personal protective equipment: full-face or half-face respirator with organic vapor cartridges, sealed goggles, nitrile gloves, and protective clothing. Clean residues with a damp mop or HEPA vacuum to avoid spreading toxic dust. Always test the product on a small area before full application.

Frequently asked questions about Piranha NexStrip Pro paint remover:

Is this remover effective on lead-based paint?

 Yes, Piranha NexStrip Pro is specially formulated to safely remove lead-based paint without generating hazardous dust when used properly.

Can this remover be used outdoors?

 Yes, this paint remover is designed for both indoor and outdoor use. It withstands moderate weather conditions and adheres well to vertical surfaces thanks to its paste texture.

How much surface can be treated with a 20-liter bucket?

 A 20 L (5 US gal) bucket covers approximately 185 to 210 sq. ft. (17 to 19.5 m²), depending on application thickness and surface type. This makes it a cost-effective choice for large-scale renovation projects.

Suggested complementary products for the Piranha NexStrip Pro paint remover:

Need additional safety equipment? See the articles; Safety Liberty hard hat (TA14LR), Omega II minor hard hat type 1 (TA14FS), motorized respirator with 1000 protection factors (R6800PF), 3M  mask protection film (R6885).

Under "Accessories" at the bottom of the page. If you're looking for work equipment, have a look at the following products: White antistatic coveralls with (V51), containment fabric or (SAH2MA) air cleaners (SACTT2).

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.