- New
Lad-Saf DBI-SALA 3M vertical cable safety system instructions and label plate 6100252
FPA6100252
Aluminum instructions and label plate for the Lad-Saf DBI-SALA 3M vertical cable safety system 6100252. Carries the instructions and the 3M Connected Safety ID for inspection tracking.
Return conditions:
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
Lad-Saf DBI-SALA 3M vertical cable safety system instructions and label plate 6100252
3M purchase code: 7012263007, model: 6100252
The Lad-Saf DBI-SALA 3M vertical cable safety system instructions and label plate 6100252 is the inspection plate for Lad-Saf vertical safety systems. Made of aluminum, it carries the system instructions and identification and attaches to the bracket to support inspection tracking. It features a 3M Connected Safety ID that simplifies equipment tracking and management throughout its service life.
The Lad-Saf vertical cable safety system brackets have been redesigned to simplify and speed up installation, with up to 72% fewer parts than previous models. The pre-swaged cable is offered in various lengths and types, and the mounting brackets adapt to multiple rung profiles, sizes and spacings. The top and bottom brackets are sold together as a system to simplify ordering, with an integrated fall arrest anchor point on the top bracket providing 100% tie-off capacity.
Benefits of the Lad-Saf 6100252 label plate
- Instructions and inspection plate for the Lad-Saf vertical system
- Durable aluminum construction
- 3M Connected Safety ID for equipment tracking
- Perfect for various types of structures and ladders
- Accompanies a redesigned system with up to 72% fewer parts
- Completes a system with an integrated fall arrest anchor point
Plate specifications
- Product type: instructions and inspection plate
- Material: aluminum
- Integrated 3M Connected Safety ID
- Dimensions: height 11.15 in (28.3 cm), width 0.65 in (1.7 cm), length 11.65 in (29.6 cm)
- Weight: 0.36 lb (0.16 kg)
- Compatible with Lad-Saf vertical cable safety systems
Role of the inspection plate
On a permanent fall arrest system, a legible inspection plate is essential for regulatory tracking. It shows the system information, inspection dates and the identification needed for traceability. The 6100252 plate attaches to the Lad-Saf system and, thanks to its 3M Connected Safety ID, allows the equipment inspection history to be recorded and consulted reliably.
Worksites and industries
- Vertical access on fixed ladders and towers
- Construction, general industry, oil and gas
- Telecommunications and maintenance of elevated structures
- Any Lad-Saf vertical cable safety system
Inspection and tracking
The plate must remain legible and firmly attached to the system. Check that it is not worn, corroded or detached. A formal inspection of the complete system by a competent person other than the user is required at least once a year, per 3M manufacturer instructions and applicable provincial regulations. Any illegible plate must be replaced. See our services to learn more.
Plate maintenance
Clean the plate with water and mild soap, then let it dry. Do not paint or cover the instructions or the ID. Store the equipment in a clean, dry place. Follow the 3M user manual instructions for system maintenance.
FAQ about the Lad-Saf 6100252 plate
What is this plate for?
It carries the instructions and identification of the Lad-Saf vertical safety system and supports inspection tracking.
What material is it made of?
Aluminum, for durability in outdoor environments.
What is the 3M Connected Safety ID?
It is an identifier that simplifies tracking and management of the inspection equipment throughout the system's life.
Is it compatible with all Lad-Saf systems?
It is intended for Lad-Saf vertical cable safety systems. Verify compatibility with your system through a competent person.
Is the instruction manual included?
Yes, the plate carries the system instructions and identification; always refer to the 3M user manual for complete installation and inspection.
Complementary fall protection equipment suggestions
The wind-turbine technician climbs several storeys inside the nacelle up a vertical ladder, helmet and harness always on. A wrong move or unsuitable equipment is enough to turn a routine climb into a serious fall. On this type of job site, he wears his full personal protective equipment: a Class L sternal-D-ring safety harness (FPH111319XCALP) that keeps him facing the ladder, cut-resistant gloves (G132), safety glasses (YA12E93102), a protective helmet (TA80) held by its chin strap (TA14CS), a high-visibility garment (V139FN) and hearing protection, earplugs (O1100).
To build the complete vertical fall arrest system, pair this product with the other components of the Lad-Saf range: the Lad-Saf X3 sleeve (FPA5000338); a flexible lifeline counterweight (FPA5901583); the Lad-Saf system (FPA6100219); a stainless-steel pole cable guide (FPA6100136); an intermediate galvanized or stainless cable guide; an intermediate galvanized pole cable guide (FPA6100430); and an end-of-line cable guide. Also plan a RollGliss R550 rescue and descent device (FPLR5503325) for controlled descent, and mark off the area at the base of the structure with a DANGER barricade tape (ECT3RE9).
FPA6100252
Data sheet
- Product group
- Safety equipment
- Main category
- Personal protection
- Sub category
- Fall protection
- Sub sub category
- Rope & rope grab
- Name of the product
- Lad-Saf DBI-SALA 3M vertical cable safety system instructions and label plate 6100252
- Product code
- FPA6100252
- Product use
- Documentation and inspection tracking of Lad-Saf vertical systems ; construction, general, oil and gas industry ; telecommunications.
- Approved/Certified
- Complies with CSA Z259.11-05 and CSA Z259.2.5-17
- Manufacturer
- 3M DBI-SALA
- Country of origin
- United State of America
- Format
- Length of 2 ft / 0.6 m
- Reusable
- Reusable with careful inspection and proper installation
- Features
- Durable aluminum instruction plate for the Lad-Saf vertical system.
- Additional Features
- The worker must use a 5/8" (16 mm) diameter rope approved for fall arrest
- Characteristic adding safety
- The carabiners are capable of withstanding a force of 3600 lb (16 kN) without deforming
- Characteristics of the strap or cable
- Compatible with various Lad-Saf structures and ladders.
- Characteristics of metal parts
- Non-painted metal parts
- Carabiners characteristics
- Equipped with a 2' (0.6 m) lanyard, energy absorber and standard carabiner with a ¾" (19 mm) opening
- Feature that facilitates use
- 3M Connected Safety ID for equipment tracking and inspection.
- Includes
- Aluminum instructions and inspection plate with 3M Connected Safety ID, for the Lad-Saf vertical cable safety system.
- Property of the material
- Polyester straps offer better resistance to acidic chemicals
- Worker’s weight
- 200 to 386 lb / 90.72 to 175.09 Kg
- Classification
- Type E6
- Material1
- Aluminium
- Material2
- Steel
- Washable
- Wash in warm water, 98.60°F/ 37°C. Never use bleach or other abrasive or chemical products on your lanyard. Air dry
- Length (in/cm)
- 11.65 in / 29.6 cm
- Width (in/cm)
- 0.65 in / 1.7 cm
- Height (in/cm)
- 11.15 in / 28.3 cm
- Weight (lb/kg)
- 0.36 lb / 0.16 kg
- Sold by
- Unit
- Color
- High Visibility Green
- Return conditions
- No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
- Caution
- Maximum supported worker weight of 200 lb to 386 lb / 90.72 kg to 175.09 kg, including clothing, tools and equipment
You might also like
Comments (0)
No customer reviews for the moment.
8 other products in the same category:
Aluminum instructions and label plate for the Lad-Saf DBI-SALA 3M vertical cable safety system 6100252. Carries the instructions and the 3M Connected Safety ID for inspection tracking.