3M Speedglas G5TW/VC anti-fog inside plate 06-0200-40

3M Speedglas G5TW/VC anti-fog inside plate 06-0200-40

3M manufacturer code: 7100331033, model 06-0200-40

This item is not stocked. Delivery time varies with the manufacturer; contact us for a delivery date.

People often think of the outside cover, but the inside cover matters just as much: it sits right in front of your eyes. The 06-0200-40 protects the inner face of G5TW and G5VC auto-darkening filters, and its anti-fog coating helps maintain a clear view when condensation appears inside the helmet. When it is scratched, pitted or too dirty to clean, a new cover restores clear vision and the filter stays in service. The bag of 5 keeps up with maintenance on one or several G5 helmets.

Features and benefits for the welder

• Anti-fog coating for a clear view, even when humidity builds up inside the helmet.
• Shape dedicated to G5TW and G5VC filters: the right part the first time.
• Protection for the inner face of the filter, the one closest to your eyes.
• Targeted upkeep: the cover is changed on its own and the auto-darkening filter stays in service.
• Bag of 5 polycarbonate covers for several replacements.

Applications and assembly compatibility

The 06-0200-40 is designed for G5TW (R46-0000-30TW) 46-0000-30TW and G5VC (R46-0000-30VC) 46-0000-30VC filters, fitted in a compatible G5-03 helmet or in the G5-01 (RG501) helmet. The model printed on your filter confirms the right cover before ordering.

Specifications and applications

• Visor coating : Anti-fog
• Product type : Inside protection plate
• Coating : Anti-fog

Fitting and checking 06-0200-40

Remove the worn inside cover following the G5TW or G5VC filter instructions, then place the new one in its retainers. Make sure it is fully engaged and the viewing area is clear before refitting the filter in the helmet.

Care and replacement

When your view becomes cloudy while the outside cover is clean, the inside cover is often the cause. Wipe it gently with a clean lint-free cloth; if pits or scratches persist, replace it.

Safe use

Always use the inside cover with the filter fitted in a complete helmet. Arc protection is provided by the auto-darkening filter, which this cover helps keep in good condition.

FAQ: the 06-0200-40 part

Which filters use the 06-0200-40 cover?

The G5TW 46-0000-30TW and G5VC 46-0000-30VC auto-darkening filters. The G5NC takes the 06-0200-21 cover instead.

What does the anti-fog coating do?

It helps limit fogging on the inner face, the one closest to your face, so the joint stays visible while you work.

How many anti-fog covers do I get?

5 inside covers, enough for several replacements or to equip several helmets.

Does the cover fit the G5-01 helmet?

Yes, as long as the G5-01 or G5-03 helmet is fitted with a G5TW or G5VC filter. The filter determines the inside cover.

Should I change the outside cover at the same time?

Each cover wears at its own pace: replace the one that is marked, and take the opportunity to inspect the other.

Complementary suggestions

Behind this anti-fog plate, the welder wears foam-sealed Virtua Max glasses (YA11872) and Endura goatskin and Kevlar gloves (G625). Corded earplugs (OA1100C), Kevlar sleeves (VS21) against burns and an orange flame-resistant ARC 2 coverall (V7705) complete the outfit.

The plate sits behind the G5VC (R46-0000-30VC) filter or the G5TW (R46-0000-30TW) filter, on the G5-01 helmet. To restore its fit when needed, replace the headband (R46-0400-51). In front of the filter, the outer (R06-0200-51) plate protects the outside face; the FPC 1000 kit (R46-1000-00) adds the head cover and neck protector of the same helmet.

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.