3M Speedglas G5NC anti-fog inside plate 06-0200-21

3M Speedglas G5NC anti-fog inside plate 06-0200-21

3M manufacturer code: 7100349754, model 06-0200-21

This item is not stocked. Allow 7 days for delivery.

The G5NC filter has its own inside cover, and this is it. The 06-0200-21 protects the side of the filter facing your eyes and carries an anti-fog finish designed for this model. In metalworking environments, it helps keep a clear surface in front of your eyes, even when condensation threatens. The day it gets scratched, pitted or covered in deposits, simply replace it: the job is limited to the worn consumable and the auto-darkening filter stays in service. The bag of 5 covers several replacements.

Features and benefits for the welder

• Anti-fog finish designed for the G5NC filter.
• Easy identification: 3M specifies it for the G5NC 46-0000-20, with no confusion with other G5 covers.
• Clear surface right in front of your eyes, to read the joint effortlessly.
• Replacement of the worn consumable only, without changing the filter.
• Bag of 5 to keep up with maintenance on one or several helmets.

Applications and assembly compatibility

The G5NC technical sheet and G5-03 instructions specify the 06-0200-21 for the G5NC (RG5NC) filter, fitted in a compatible G5-03 or in the G5-01 helmet (RG501). It is intended for metalworking tasks within the use limitations of the helmet and filter.

Specifications and applications

• Environmental conditions : Metalworking environments
• Auto-darkening filter included : No
• Compatible welding helmet : Series G5-03E
• Visor coating : Anti-fog
• Part type : Consumable
• Product type : Inside protection plate
• Coating : Anti-fog

Fitting and checking 06-0200-21

Follow the G5NC filter procedure: remove the inside cover, place the new one in its retainers and check that it sits evenly. Refit the filter in the helmet and check that your view is clear before use.

Care and replacement

Examine the cover before work and each time you clean the helmet. Coating condition matters for visual comfort: a pitted or scratched cover, or one that stays cloudy after gentle wiping, should be replaced.

Safe use

The cover is used with the G5NC fitted in a complete helmet; the filter provides arc protection and the cover preserves its surface. Replace it as soon as it cracks.

FAQ: the 06-0200-21 part

Which filter is the 06-0200-21 cover designed for?

For the G5NC 46-0000-20 auto-darkening filter, whichever compatible G5 helmet it is installed in.

Can I use it with a G5TW or G5VC filter?

Those two filters take a different cover, the 06-0200-40. Check the model printed on your filter before ordering.

Is the G5-03 E the only compatible helmet?

No. The 3M portal names the G5-03 E, but the G5NC is also designed for the other compatible G5-03 helmets and for the G5-01.

How many covers does the bag contain?

5 anti-fog inside covers, which means several replacements for the same G5NC filter.

Why an anti-fog cover on the inside?

It is the face closest to your face, where condensation can get in the way; the anti-fog coating helps keep your view clear.

Complementary suggestions

Under a G5-03 helmet fitted with the G5NC, the welder wears Solus anti-fog glasses (YAS1101). For hand protection, choose the wing-thumb leather welding gloves (G605) or, for MIG welding, the insulating-cotton-lined pair (G600) according to the task. UltraFit earplugs (OA4002) and an 8212 respirator (R8212) for fumes (particles) complete the PPE selection according to workplace hazards.

The plate sits behind the G5NC (RG5NC) filter; the inside (R06-0200-20) plate fits the same filter and the anti-fog (RG5TW-VC) plate fits the G5TW and G5VC filters. The holder (R46-0680-00) takes a magnifier on compatible G5-01 helmets only. For a G5-03, follow the magnifier mounting method in its instructions; store the helmet in a protective bag (R06-0500-65).

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.