3M Speedglas passive replacement lens 06-0005-P10

3M Speedglas passive replacement lens 06-0005-P10

3M manufacturer codes: 06-0005-P10 (7010385032), 06-0005-P11 (7010316592), 06-0005-P12 (7010385033), 06-0005-P13 (7010342412)

Available in 4 shades. Select the variant you need from the drop-down menu.

This item is not stocked. Allow 45 days for delivery.

A cracked, chipped or worn passive lens does not mean replacing the whole cassette. The 3M Speedglas 06-0005 replacement lenses slip into the existing passive adaptor and restore a clear view, while keeping its holder and any covers still in good condition. Four fixed shades are offered, from 10 to 13: keep your usual shade or adapt the cassette to the next job. Made of glass with no electronics, these lenses hold a constant shade throughout welding, which makes them valuable for long continuous runs. The 3M portal also lists them for wet surfaces.

Features and benefits for the welder

• Four fixed shades to choose from, 10 to 13, to match the cassette to the process.
• Glass lens with a constant shade, no battery or settings.
• Economical replacement: the adaptor and covers in good condition stay in service.
• 2 lenses of the same shade per pack, to keep a spare on hand.
• Recommended for long continuous welds and for wet surfaces.

Applications and assembly compatibility

These lenses fit the 9100 passive assembly (R06-0000-P10), compatible 9100 configurations and the Versaflo M-407SG (RM407SG) and M-409SG (RM409SG) headtops named on the 3M portal. The G5 instructions also list these four references for their passive assemblies. On the wearer side, the 126000 (R126000) cover protects the inner face of the cassette.

Specifications and applications

Details by selection

Fitting and checking 06-0005-P10

Open the passive adaptor following the figures in the 9100 instructions, remove the old lens and place the new one. Close the cassette, then check the printed shade, the order of the covers and the engagement of the clips before refitting the assembly in the helmet.

Care and replacement

Examine both faces and the edges of the lens each time you clean the helmet. A crack, a chip or a damaged surface that interferes with vision calls for a new lens. Clean clear covers, front and back, help preserve your lenses.

Safe use

Choose the shade according to the process and current, following the chart in the helmet instructions. A cracked or chipped lens is replaced before welding.

FAQ: the 06-0005-P10 part

How do I choose between shades 10, 11, 12 and 13?

The more intense the arc, the darker the shade must be. The chart in your helmet instructions gives the right shade for each process and current.

Is the adaptor included?

No, each pack holds 2 lenses of the chosen shade, without an adaptor. To start from scratch, the 06-0000-P10 assembly combines the lens and its adaptor.

Do these lenses suit Versaflo headtops?

Yes, the 3M portal lists them for the M-407SG and M-409SG headtops, on top of compatible 9100 helmets.

Which cover protects the lens on the wearer side?

The 126000 inside cover, in a 90 x 110 mm format, protects the inner face of the passive cassette.

Does the delivery time vary by shade?

Yes, each shade has its own delivery time, shown in the shade table at the top of the page.

Complementary suggestions

With a 9100 passive lens, the welder wears SecureFit SF201 glasses (YASF201) under the helmet and split and full-grain leather welding gloves (G602). Disposable 3M earplugs (O1100), a flame-resistant FR-Tech shirt (V129) and flame-resistant FR-Tech cargo trousers (V7765) complete the outfit.

To maintain the same passive system, choose the standard (R06-0200-51) plate, the hard-coat (R06-0200-52) version or the heat (R06-0200-53) version to suit the planned work. The assembly (R06-0000-P10) holds the replacement lens, while the inside (R126000) cover protects its inside face. Check the fitted components before preparing the replacement parts for the helmet.

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.