Availability date:
Ranpro rain jacket with waterproof hood in green polyester covered with polyvinyl chloride (PVC) for extreme conditions.
This rain jacket with hood is available in sizes ranging from small (S) to quintuple extra large (5XL). Please choose your size from the drop-down menu above.
Ranpro manufacturer's code: V3243040, model 90345DH
This waterproof polyester rain jacket is coated with top-quality PVC for 100% waterproofing. The manufacturer assures that the PVC layer is 0.45 mm thick of superior quality, soft and supple. This rain jacket combined with overalls is 100% windproof and waterproof. The jacket is made with triple-welded seams, which are thermally welded by radio frequency. This rain jacket is ideal for everyday use in extreme conditions, as it is perfectly waterproof. It is recommended for everyone except those surrounded by vehicles.
Design:
This rain jacket is easy to wear over warm clothing, while still allowing good air circulation thanks to its loose fit.
PVC is renowned for its resistance to stretching and tearing. The advantage of PVC inner lamination is that it ensures a perfect seal, even in high winds. PVC repels water, so workers can go about their business without worrying about water getting into their pants. On the other hand, PVC is heavier than polyurethane, breathes less and hardens in very cold weather.
Waterproofing:
This rain jacket is waterproof thanks to triple seams thermally welded by radio frequency. Workers usually wear this type of raincoat when performing tasks that expose them to low or moderate risks of chemical splashes. PVC is a thermoplastic polymer resistant to many chemicals, oils including motor oils, animal and fish fats, light acids, bases, solvents, oxidizers and ozone. It is also resistant to abrasion, perforation and stretching.
PVC-coated fabrics are recommended for workers in environments with temperatures ranging from -5°C to 18°C, accompanied by precipitation and strong winds. Because PVC is non-porous, this waterproof fabric keeps workers dry during torrential downpours; however, it does not breathe, so a sauna effect created by perspiration can occur. So it's important to choose the right clothing for the job.
Peculiarities of:
This rain jacket features a 3-part hood with a draw cord. In addition, the jacket features stainless steel snap fasteners on the outer flap and brass snap fasteners on the inner flap.
Application:
Fishing, construction, forestry and mining, food processing, outdoor work and infrastructure construction.
Restriction:
This rain jacket is not flame-resistant.
Maintenance and service life:
This waterproof jacket can be machine-washed on the gentle cycle using cold or lukewarm water and a mild detergent. Do not use bleach or fabric softener. It should also be air-dried, away from direct sunlight. This jacket should never be tumble-dried, ironed or dry cleaned.
Suggestions:
You'll need a waterproof overalls to complete your (VP90600) protection, or a pair of boots (VC405FUL). Need additional safety equipment? See items; (GS21TXUFN) cut-resistant glove, (VV50) traffic jacket, (V6672) surveyor's jacket, (EPTCONE28B) 28" traffic cone, (VP212) Green Waterproof Suit, (G051144) Nylon and Orange Latex Knit Glove under "Accessories" at the bottom of the page.
Type of product | Safety equipment |
Main category | Personal protection |
Sub category | Safety clothing |
Sub sub category | Rainwear & rain gear |
Name of the product | Waterproof coat |
Series of products | Defender |
Product code | VP90345 |
Approved/Certified | None |
Manufacturer | Ranpro |
Country of origin | China |
Exterior finish | The manufacturer guarantees that the PVC layer is 0.45 mm thick, of superior quality, soft and supple |
Flame Resistance | No Flame resistant |
Choice of format | Size small (S) to 5 extra-large (5XL) available |
Reusable | Reusable with prior hygienic measurement |
Recommended use temperature | PVC-coated fabrics are recommended for workers in environments with temperatures ranging from -5°C to 18°C, accompanied by precipitation and strong winds |
Features | PVC is well-known to be resilient; it can withstand stretching as well as wear and tear. The advantage of having a PVC coating is that it ensures a perfect waterproofing even with high winds |
Additional Features | These 100% windproof and waterproof jacket are made with triple-welded seams, which are thermally welded by radio frequency |
Comfort features | All seams are taped and heat sealed |
Waterproof rating | The manufacturer grants this product a waterproof rating of 10000 mm. All seams have been taped and heat-sealed |
Includes | Closes at the front with a double flap system and chrome plated brass snaps |
Includes 2 | Equipped with an integrated, non-detachable cap |
Material1 | 80% PVC (Chlorinated polyvinyl chloride) |
Material2 | 20% polyester |
Material3 | Brass |
Washable | Machine wash on delicate with cold or lukewarm water and a mild detergent. Do not use whiteners, bleach, or fabric softener. Air dry. Do not expose to sunlight. Do not machine dry. Do not iron. Do not dry-clean |
Dimensions of the product | The dimensions of the product depend on the size selected by the customer. |
Length (in/cm) | 12 in / 30.48 cm |
Width (in/cm) | 6 in / 15.24 cm |
Height (in/cm) | 6 in / 15.2 cm |
Weight (lb/kg) | 2 lb / 0.9 Kg |
Sold by | Unit |
Color | Green |
Return conditions | No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page |