- New
This item is not stocked. Delivery time varies with the manufacturer; contact us for a delivery date.
View the joint with a tone suited to the material using the 3M Speedglas G5-03 Pro 10-0100-30VC and G5VC filter. Natural Colour, Variable Colour, side windows and adjustable headgear support visibility in varied work. Grinding mode assists finishing between passes; this optical helmet does not include a respirator.
3M manufacturer code: 7100312624, model 10-0100-30VC
This item is not stocked. Delivery time varies with the manufacturer; contact us for a delivery date.
Reading pool edges involves an appropriate shade as well as the contrast and colour tone the welder perceives through the filter. The 3M Speedglas G5-03 Pro 10-0100-30VC welding helmet is ready to weld on delivery: it comes with the G5VC auto-darkening filter, the G5 model headgear and the front panel. The G5VC switches from a shade 3 light state to dark shades 5 and 8 to 14, and its natural colour and variable colour technologies change colour perception through the filter. Its 4 sensors monitor a 2.9 X 4.3 in / 73 X 109 mm view, complemented by side windows that open the view to the sides. The grinding mode lets the welder dress a weld without changing helmets. The filter runs on a 3 V CR2450 lithium battery.
When material, surface finish or lighting changes, one fixed colour appearance does not always provide the same visual cues. G5VC adjusts the tone seen in the dark state to help find suitable contrast around the weld pool and joint edges. Natural Colour Technology retains a more realistic colour view in both light and dark states.
G5-03 Pro houses this filter in a shell with side windows and ergonomic headgear. Setting helmet position helps centre the view without requiring constant posture correction. Side windows help the wearer notice nearby movement while the main view remains through the welding area.
The TAP function presented by 3M for G5VC allows switching between designated modes by tapping the helmet side, including with a glove, after filter configuration. This supports transitions between welding and surface finishing. The active mode must always be checked before striking an arc.
3M offers this helmet for welding in general manufacturing. It suits shop welders who switch from one process to another during the day, structural fabrication stations where side windows help spot co-workers and obstacles nearby, and maintenance crews who alternate welding and finish grinding on the same job.
Use the assembled G5-03 Pro system only between -5 and +55 °C. Do not use it where contact with an open flame is possible.
3M excludes laser welding and heavy overhead work that exposes the wearer to molten metal. The helmet protects the eyes and face, but it is not respiratory protection against welding fumes.
Shade is set according to the table in the 3M G5VC instructions, applying the most restrictive limitation stated by 3M.
| Component | 3M model | Sylprotec code |
|---|---|---|
| G5-03 Pro welding helmet with headgear and front panel (quantity: 1) | ||
| G5VC auto-darkening filter (quantity: 1) | 46-0000-30VC | R46-0000-30VC |
Supplied in a case of one unit. No respiratory protection or lamp is included.
Adjust the G5 headgear so the helmet stays stable when it tilts, then choose the G5VC shade between 5 and 8 to 14 according to the instructions. Before striking the arc, make sure the 4 sensors are not covered and that the filter switches from shade 3 to the selected shade. Activate the grinding mode for grinder work, then return to welding mode before welding.
G5-03 Pro platform, G5VC 46-0000-30VC filter, light shade 3, dark shades 5 and 8 to 14, 4 sensors, 2.9 X 4.3 in / 73 X 109 mm view, TAP, natural colour and variable colour technologies, 3 V CR2450 lithium battery. Polyphthalamide (PPA) shell, black colour, side windows, G5 headgear and front panel included. Weight: 1.400 lb / 0.635 kg. With its exact filter, the helmet meets ANSI Z87.1 and CSA Z94.3.
Adjust headgear height, retention and filter-to-eye distance before setting the optics. Select dark shade and sensitivity for the process, then compare colour tones in a realistic working position. Colour preferences do not replace the shade-selection table.
For grinding between passes, use the designated mode and verify its indication. Return to welding mode before any arc strike even if the light state already provides a clear workpiece view. The task light and extended coverage are platform options. If respiratory protection is needed, select it separately: G5-03 Pro does not include the Pro Air supply ducts.
Before each use, check that the helmet is complete, undamaged and correctly assembled, and repair or replace defective parts. Do not immerse the helmet in water or spray liquid directly on it; wipe the shell and side windows with a slightly damp cloth. Replace the CR2450 battery as soon as the filter no longer responds normally and change scratched protection plates.
Yes. The helmet comes with the G5VC 46-0000-30VC filter, the G5 headgear and the front panel.
The G5VC light-state shade is 3; dark settings are shade 5 or shades 8 to 14.
They widen the view to the sides of the helmet, useful for keeping track of the work environment.
A 3 V CR2450 lithium battery.
Once configured according to the instructions, tapping the helmet side switches between the filter's designated modes. This avoids searching for the control at every transition. Verify grinding-mode indication and the return to welding mode before the next arc.
For a shop welder working under this G5-03 Pro all day, plan Solus glasses (YAS1103) with amber anti-fog lenses for inspections and TenActiv cut-resistant gloves (GS13TAFNT) with nitrile foam coating for sheet metal. An H6B neckband earmuff (OPH6B) requires a fit check with the helmet, the certified 8210 respirator (R8210) is added according to the fume assessment, and orange traffic cones (EPTCONE28B) mark off the station.
To replace a damaged shell from the same series, the G5-03 Pro shell (R10-0300-52) is sold without headgear or filter, so the existing G5VC and G5 headgear can be refitted. G5VC protection plates are ordered by their exact 3M model. To compare model 10-0100-30VC with distinct configurations, also review variant (RG5-03-E09-0100), solution (RG5-03E), model (R45-009935), helmet (R45-0099-33), assembly (R10-0300-52). Compare their contents with model 10-0100-30VC; the parts are not presumed interchangeable.
Data sheet
Specific References
You might also like