- New
This item is not kept in stock. Please allow 44 days for delivery.
Retain your filter and G5 suspension by replacing the outer shell with the 3M Speedglas G5-03 Pro 10-0300-52. Front panel and side windows are included. This part restores helmet coverage without changing the optical functions of the compatible filter refitted to it.
3M manufacturer code: 7100312604, model 10-0300-52
This item is not kept in stock. Please allow 44 days for delivery.
Replacing the G5-03 Pro outer shell restores coverage without automatically changing optics familiar to the wearer. The 3M Speedglas G5-03 Pro 10-0300-52 shell is the spare part that renews the housing of a G5-03 Pro helmet without buying a new filter or suspension. It comes with its front panel and side windows; the G5 model headgear and welding filter are taken from the original helmet or ordered separately. A shell that is split, heat-deformed or marked by spatter can thus be replaced quickly in the shop. Once reassembled with an approved filter, the shell regains the G5-03 Pro welding use.
When a filter still operates but the shell shows spatter or heat damage, the 10-0300-52 targets the repair. Front panel and side windows accompany the shell; the filter and headgear are excluded. The workshop can retain compatible components that pass inspection without confusing this replacement with a newly equipped helmet.
G5-03 Pro is intended for work alternating between welding and preparation. Its shape and side windows contribute to coverage and awareness of the surroundings. Correct positioning in front of the eyes still comes from the refitted suspension. A new shell cannot correct worn or poorly adjusted headgear.
Natural Colour, Variable Colour, tack-welding and grinding functions remain those of the retained filter. Replacing the shell does not turn one filter into another. Compatibility must concern references intended for G5-03 Pro, not merely similarity to a Pro Air or E.
The 10-0300-52 shell belongs to the G5-03 Pro series and takes a G5 model suspension. 3M offers the G5-03 Pro with the G5VC filter, in the 10-0100-30VC helmet, and the G5TW filter, in the 10-0100-30TW helmet. It does not apply to the G5-03 Pro Air, G5-03 E, G5-01 or 9100 versions, which have their own shells.
| Component | 3M model | Sylprotec code |
|---|---|---|
| G5-03 Pro shell with front panel (quantity: 1) | 10-0300-52 |
Not included: headgear and welding filter.
The shell is intended for general manufacturing shops that equip their welders with G5-03 Pro helmets. It is used by the tool crib to keep a spare shell, by maintenance departments repairing a helmet dropped from a walkway, and by welding schools whose shared helmets wear out faster.
Remove the filter, plates and G5 headgear from the damaged shell, then refit them in the new shell according to the 3M G5-03 Pro instructions. Take the opportunity to replace scratched protection plates. Before welding, check filter retention, helmet tilt and the absence of light around the viewing area.
Use the assembled G5-03 Pro system only between -5 and +55 °C. This limit applies to the helmet completed with an approved filter and components. Do not use it where contact with an open flame is possible.
On its own, the shell is not ready for welding: without a filter, it does not protect against arc radiation. CSA Z94.3 and ANSI Z87.1 compliance covers the configuration assembled with an approved filter, not the shell alone. 3M excludes laser welding and heavy overhead work exposing the wearer to molten metal.
Prepare transfer of the filter, its plates and headgear by examining support and locking points. The shell must accept the intended parts without drilling or modifying retainers. Also check the mechanism holding the helmet in its raised position.
After assembly, adjust the suspension for the wearer and view a workpiece from the normal workstation posture. The filter should stay aligned with the eyes and remain stable during movement. Check its controls and operation according to its own instructions. The 3M parts list shows task-light and neck or head coverage options; these remain separate from the shell and must not be assumed to be supplied with this replacement.
At every reassembly and before the shift, inspect the shell, front panel and side windows; a crack, deformation or damaged attachment requires replacement. Do not immerse it in water or spray liquid directly on it. Keep the spare shell in its packaging, away from heat.
No. It is sold without headgear and without a filter; the front panel is included.
With the G5-03 Pro series, which takes a G5 model suspension. It does not apply to the Pro Air, E, G5-01 or 9100 versions.
Yes, the filter from your G5-03 Pro helmet is refitted in the shell, with protection plates in good condition.
Yes. The shell has the G5-03 Pro side windows.
No. Available controls and modes belong to the installed filter. The 10-0300-52 restores the outer shell with front panel and side windows; it does not replace filter electronics or headgear, both excluded from this reference.
To equip the work area for this configuration, protect the eyes during tasks away from the welding arc with eyewear (YA12263); protect the hands while handling cool parts with gloves (GSSXPU3OF); keep hearing protection available near the workstation with earplugs (O1100); select respiratory protection according to the task assessment with respirator (R8210V); mark access routes around the work area with marking (ECT3RE9).
G5-03 Pro series parts, such as the G5 headgear and the protection plates for G5VC or G5TW filters, are selected by their exact 3M model. None of these parts is offered online yet: specify the shell model, 10-0300-52, when making a request. To compare model 10-0300-52 with distinct configurations, also review variant (RG5-03-E09-0100), solution (RG5-03E), model (R45-009935), helmet (R45-0099-33), assembly (R10-0100-30VC). Compare their contents with model 10-0300-52; the parts are not presumed interchangeable.
Data sheet
Specific References
You might also like