SAHFS

Second stage filter for HEPA-AIRE/BULLDOG air scrubber. 24"X24"X2" filter for particles 3 µm to 10 µm

$124.00

Return conditions : No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

Secondary filter for the HEPA-AIRE® and BULLDOG® portable air scrubber (SAH2, SAH2MA, SAH3KLV and SAH4MA) or any other model of air scrubber which requires a 24 in X 24 in X 2 in filters. Sold by the pack of 12 filters.

This second stage filter captures particles 3 µm to 10 µm such as mold spores, hair spray, fabric protector, dusting aids, cement dust, etc. This filter is the second stage of an air scrubber’s filtration system. It has been designed to capture particles between the sizes of 3 to 10 µm and to let the smaller travel through to be filtered by the HEPA filter. It is recommended to replace the secondary filter every 72 hours to 3 months depending on the concentrations in which the contaminants are found or whenever the machine emits a signal.

This blend of cotton and polyester filter is disposable and has been designed to extend the life of the HEPA filter.

This filter has been listed as UL900 class 2 for its smoke emission and flammability limits. This filter has also a MERV 6 rating (Minimum Efficiency Reporting Value) according to the measuring scale to rate the effectiveness of air filters set by the ASHRAE (American Society of Heating, Refrigerating and Air Condition). A rate 6 means the effectiveness of this filter turns around the capture of 90% of the particles between 3 and 10 µm.

This filter can also be a replacement second stage filter on many other air scrubbers by Abatement Technologies: PAS1600S, PAS1600SHS, PAS2400E, PAS2000EK, PAS2000EAK, PAS2KA-3, BD2KL, BD2KLV, H2000L, H2000LA et H5000C or any other models on the market that requires a filter of the same dimensions..

Please note that once the packaging has been opened, we cannot accept returns or exchanges.

Type of productSafety equipment
Main categoryIndustrial accessoiries
Sub categoryAsbestos decontamination
Name of the productFiltre for air purifier
Product codeSAHFS
Maintenance freeDisposable product
Secundary filter capacityCapture of 90% of the particles between 3 µm and 10 µm.
Secundary filter dimensions24 in X 24 in X 2 in
Time of useIt is recommended to replace every 72 hours to 3 months depending on the concentrations in which the contaminants are found
Length (in/cm)24 in / 60.9 cm
Width (in/cm)24 in / 60.9 cm
Height (in/cm)24 in / 61 cm
Weight (lb/kg)3 lb / 1.4 Kg
Sold by1 pack (12 units)
Return conditionsNo returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

Accessories

30 other products in the same category: