Final stage HEPA filter for PREDATOR 750 air scrubber

HEPA filter for Predator 750 air purifiers: certified performance and reliability

Final stage HEPA filter for the PREDATOR 750 portable air scrubber (SAH1) or any other air scrubber that requires a 16" X 16" X 6" HEPA filter. Sold individually.

Choose high-efficiency air purification with the Predator 750 HEPA filter.

The Predator 750 HEPA filter is the last and most critical step in the air filtration process. It captures the finest particles that pass through the pre-filters, including bacteria, spores, soot, pollen, pet hair and dander, dust mites, smoke, and airborne allergens. Made of fiberglass with a plastic frame, this disposable filter is UL900 Class 2 certified for low smoke emission and flame resistance. Its 99.97% efficiency at 0.3 microns ensures optimal air purification in demanding environments.

The ultimate solution for professional air purification.

Key features of the Predator 750 HEPA filter 16x16x6:

This HEPA filter is built with microglass media and a seamless urethane foam gasket to ensure airtight sealing. Its mini-pleat design maximizes filtration surface area and extends filter life. The standard 16 X 16 X 6 size fits Predator 750, PRED600, and other compatible air purifiers. It is engineered to trap the vast majority of particles that reach the final filtration stage, protecting both equipment and air quality.

Installing the HEPA filter in your Predator 750 air purifier:

Installation is quick and straightforward. Open the air purifier’s filter compartment, remove the used filter, and insert the new HEPA filter, ensuring the foam gasket is properly aligned for a secure seal. Close the compartment and verify that the unit is operating correctly. This filter is compatible with Abatement Technologies models such as Predator 750, PRED600, and any unit requiring a 16 X 16 X 6 HEPA filter.

Maintaining the Predator 750 HEPA filter for lasting performance:

No cleaning is required, as the filter is disposable. Replace it after 9000 hours of use or 18 months, depending on the level of airborne contaminants. Follow the purifier’s replacement signal for timely maintenance. Proper handling during replacement helps prevent particle dispersion and ensures continued air purification efficiency.

Using the Predator 750 HEPA filter in sensitive environments SAH1F:

This HEPA filter is ideal for high-risk settings such as asbestos removal sites, laboratories, healthcare facilities, and allergen-prone areas. To maintain peak performance, avoid exceeding the recommended usage period and always install the filter according to manufacturer guidelines.

Sylprotec reminder on filter management during asbestos removal work:

HEPA filter management:

• The HEPA filter is a critical component of the filtration system.
• It is recommended to install a new HEPA filter before starting the project in order to perform a dop test (dispersed oil particulate) and validate its efficiency.
• If the primary and secondary filters are properly maintained, the HEPA filter can be used for a longer period, but this depends on the saturation level.

Machines indicate the need for replacement:

• By an audible signal
• Or via a differential pressure gauge, whose needle indicates a loss of pressure each time the HEPA filter is replaced, a new dop test is mandatory to ensure the filter is functioning properly and that the suction remains compliant with standards.

When replacing a HEPA filter, it is imperative to turn off the machine.

This filter plays an essential role in maintaining negative pressure, which prevents the spread of contaminants into the environment. In an active workspace, such as a construction site or clean room, it is crucial not to interrupt this pressure. The machine must, therefore, be temporarily removed and replaced by another one already equipped with an operational filter to ensure continuity of containment.

Primary and secondary filter management:

• The primary filter must be changed twice a day during demolition periods as it quickly becomes clogged.
• The secondary filter is replaced once a day during demolition periods.
• Machines remain in operation during filter changes to avoid any interruption of negative pressure in the confined area.

FAQ about the Predator 750 HEPA filter:

How effective is the Predator 750 HEPA filter at capturing fine particles?

It captures 99.97% of particles as small as 0.3 microns, including allergens, bacteria, and smoke, ensuring professional-grade air purification.

Is this HEPA filter compatible with other air purifiers?

Yes, it fits the Predator 750, PRED600, and any air purifier requiring a 16x16x6 HEPA filter.

When should the Predator 750 HEPA filter be replaced?

 Replace it every 9000 hours or after 18 months of use, or when the purifier’s replacement signal is activated.

Suggested complementary products for the Predator 750 HEPA filter SAH1F:

Need additional safety equipment? See the articles; Safety Liberty hard hat (TA14LR), Omega II minor hard hat type 1 (TA14FS), motorized respirator with 1000 protection factors (R6800PF), 3M  mask protection film (R6885).

Under "Accessories" at the bottom of the page. If you're looking for work equipment, have a look at the following products: White antistatic coveralls with (V51), containment fabric (SACTT2) or (SAH1) air cleaners. 

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.