First stage filter for the PREDATOR 750 air scrubber. 16"X 16"X 1" filter for particles 10 µm and more

$42.80

Please select the available option below :

Return conditions : No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

Primary filter for the PREDATOR® 750 portable air scrubber (SAH1) or any other model of air scrubber which requires a 16 in X 16 in X 1 in filters. Sold by the pack of 12 or 50 filters.

This first stage filter captures the 10 µm and the coarsest particles such as pollen, spray paint dust, textiles fibers, carpet fibers, etc. This filter is the first stage of an air scrubber’s filtration system. It has been designed to capture the biggest particles and to let the smaller travel through to be filtered by the following filters. It is recommended to replace the primary filter every 8 to 72 hours depending on the concentrations in which the contaminants are found or whenever the machine emits a signal.

This electrostatic charged fiberglass filter is disposable and has been designed to extend the life of the second stage filter and the HEPA filter.

This filter has MERV 4 rating (Minimum Efficiency Reporting Value) according to the measuring scale to rate the effectiveness of air filters set by the ASHRAE (American Society of Heating, Refrigerating and Air Condition). A rate 4 means the effectiveness of this filter turns around the capture of 75% of the particles 10 µm or bigger. 

This filter can also be a replacement first stage filter on many other air scrubbers by Abatement Technologies: CAP600, CAP600-UV, CAP600-UVP, CAP1200 and CAP1200-UVP or any other models on the market that requires a filter of the same dimensions..

Please note that once the packaging has been opened, we cannot accept returns or exchanges.

Type of productSafety equipment
Main categoryIndustrial accessoiries
Sub categoryAsbestos decontamination
Name of the productFiltre for air purifier
Product codeSAH1FP
Product useAir cleaners and accessories
Maintenance freeDisposable product
Primary filter capacityCaptures 75% of particles 10 µm or larger
Primary filter dimensions16 in X 16 in X 1 in
Time of useIt is recommended to replace every 8 to 72 hours depending on the concentrations in which the contaminants are found
Length (in/cm)17 in / 43.18 cm
Width (in/cm)16 in / 40.6 cm
Height (in/cm)16 in / 40.64 cm
Weight (lb/kg)7 lb / 3.17 Kg
Sold by1 pack (12 units)
ColorBlue
Return conditionsNo returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page

Accessories

30 other products in the same category: